use something besides ht, i have never had much luck with ht as a term program..secure crt, reflection work very good...
Larry Letterman Cisco Systems [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Adelphia News Reader Sent: Wednesday, April 10, 2002 6:07 PM To: [EMAIL PROTECTED] Subject: Re: Very Strange [7:40966] That's strange. I just got a hold of 2 Cisco 2502s and when I boot them up, I can see everything in Hyperterminal, but I can never get to the prompt or get to the point where it says hit ENTER to continue. I don't think the routers are DOA because the two routers are acting the same way. I need to play around with the terminal settings in Hyperterminal or perhaps download that Terminal Program you guys were talking about. Other than that, I don't know how else to get into these routers if that doesn't work. Perhaps change the boot ROMs? Because they are pretty old. Any other ideas to get into these routers? P.S. I tried a control-break and I can get to the > prompt, but then I can't type anything from that point. Thanks. ""Georg Pauwen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Kevin, > > this is from the Cisco site: > > Console Port Problem on Cisco 2500 > > Symptom > Output from the router on the console screen can be seen, but anything which > is typed in is not seen. > > Problem > The terminal is set to use Ready To Send/Clear To Send (RTS/CTS) flow > control. > > On all other routers, the console port is wired to connect RTS and CTS so > even though we don't do real flow control, the terminal sees CTS in response > to asserting RTS. > > Due to the RJ45 -> DB25 adapter wiring for the 2500, this is not possible. > > Solution > Disable hardware flowcontrol or strap CTS high. > > Hope this helps, > > Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41136&t=40966 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
