Okay, here is a link to instructions on how to get into Engineering Mode. I am banging away at it figuring out how to do it. If someone finds out first, please post your findings :-)))
http://www.heinzulm.com/Cat1.htm _________________________________________________________ Manny Gonzalez ............................... CCIE# 9013 Sr. Network Analyst ..................... NY Presbyterian _________________________________________________________ Manny Gonzalez wrote: > > Tisk tisk!! Hehehee, you cheated Tim. hahahaha. See, I have eyes in here too. > > Well, the quick answer is NOT POSSIBLE. The long answer is this: > > Cisco's Catalyst OS makes a pool of 1024 addresses available to the switch. The switch will assign > addresses to each VLAN, PORT, etc. sequentially until it is exhausted. THe SC0 gets the last address > in the first module's range. > > This is ALL BURNED IN AND NOT CHANGEABLE EASILY. Or so I have been told ... > > Hard answer is that it is doable in ENGINEERING MODE or something. So I am still digging for this. > It is kind of interesting that Cisco itself has absolutely NO MENTION of the fact that it is not > easily changeable :-( > > I mean on a router you just do: > > mac-address 0022.3344.5566 > > and bam! > > :-)) > > > Timothy Ouellette wrote: > > > > Scouring cisco for an answer that someone mentioned. > > > > I'm trying to change the Bridge-ID (BID) for a particular vlan on a > > cat5k. I know it's possible if I just change the priorty for that > > particular vlan. Is it possible to change the mac address on a vlan so > > that the BID will change without change the prioty. Here's the question > > that was posed "how does one change the bridge ID for VLAN 200 on a > > Catalyst 5000 (os is 5.5(10)b" > > > > Can anyone help? > > > > Tim > > _________________________________________________________________ > > Commercial lab list: http://www.groupstudy.com/list/commercial.html > > Please discuss commercial lab solutions on this list. > -- > _________________________________________________________________ > Commercial lab list: http://www.groupstudy.com/list/commercial.html > Please discuss commercial lab solutions on this list. -- _________________________________________________________ Manny Gonzalez ............................... CCIE# 9013 Sr. Network Analyst ..................... NY Presbyterian _________________________________________________________ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41226&t=41226 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
