Tested on both a Sup II and a Sup III. URL is incorrect password HW FW SW enablepass
> -----Original Message----- > From: Manny Gonzalez [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 11, 2002 3:05 PM > To: [EMAIL PROTECTED] > Subject: Re: Change the Bridge ID on a cat5k [7:41226] > > > Okay, here is a link to instructions on how to get into > Engineering Mode. I > am banging away at it > figuring out how to do it. If someone finds out first, please > post your > findings :-))) > > http://www.heinzulm.com/Cat1.htm > _________________________________________________________ > Manny Gonzalez ............................... CCIE# 9013 > Sr. Network Analyst ..................... NY Presbyterian > _________________________________________________________ > > Manny Gonzalez wrote: > > > > Tisk tisk!! Hehehee, you cheated Tim. hahahaha. See, I have > eyes in here > too. > > > > Well, the quick answer is NOT POSSIBLE. The long answer is this: > > > > Cisco's Catalyst OS makes a pool of 1024 addresses available to the > switch. The switch will assign > > addresses to each VLAN, PORT, etc. sequentially until it is > exhausted. THe > SC0 gets the last address > > in the first module's range. > > > > This is ALL BURNED IN AND NOT CHANGEABLE EASILY. Or so I > have been told ... > > > > Hard answer is that it is doable in ENGINEERING MODE or > something. So I am > still digging for this. > > It is kind of interesting that Cisco itself has absolutely > NO MENTION of > the fact that it is not > > easily changeable :-( > > > > I mean on a router you just do: > > > > mac-address 0022.3344.5566 > > > > and bam! > > > > :-)) > > > > > > > Timothy Ouellette wrote: > > > > > > Scouring cisco for an answer that someone mentioned. > > > > > > I'm trying to change the Bridge-ID (BID) for a particular > vlan on a > > > cat5k. I know it's possible if I just change the priorty for that > > > particular vlan. Is it possible to change the mac address > on a vlan so > > > that the BID will change without change the prioty. > Here's the question > > > that was posed "how does one change the bridge ID for > VLAN 200 on a > > > Catalyst 5000 (os is 5.5(10)b" > > > > > > Can anyone help? > > > > > > Tim > > > _________________________________________________________________ > > > Commercial lab list: > http://www.groupstudy.com/list/commercial.html > > > Please discuss commercial lab solutions on this list. > > -- > > _________________________________________________________________ > > Commercial lab list: http://www.groupstudy.com/list/commercial.html > > Please discuss commercial lab solutions on this list. > -- > _________________________________________________________ > Manny Gonzalez ............................... CCIE# 9013 > Sr. Network Analyst ..................... NY Presbyterian > _________________________________________________________ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41238&t=41226 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
