If I had to guess, its because the file doesn't already exist. I know that with the CiscoWorks TFTP and also the stand alone TFTP server, the file must already exist. IE the TFTP cannot create a file, but it can overwrite it. This is done to keep someone from just starting a tftp download to a server and crashing it by filling up the HD ( or FLASH ).
Thanks Larry -----Original Message----- From: Arjun Das [mailto:[EMAIL PROTECTED]] Sent: Saturday, May 11, 2002 2:10 PM To: [EMAIL PROTECTED] Subject: Configuring router as TFTP server [7:43951] Dear Group Members, I am trying to configure a router with TFTP server, router R_0 is will be the server. Router R_1 will copy its runing config on to R_0. R_0 and R_1 are connected over a x-over Cat V cable, and I have tested the connectivity using ping - it is OK! R_0 is configured as TFTP server, by issuing the following command: tftp-server flash:r0.config when issued the above command I receive an warning, here it is Warning: flash:r0.config does not exist. Command retained. Next, from R_1 I issue the following commands: R_1# copy star tftp Remote host[]? 172.154.2.2 Name of configuration file to write [r_0-config]? r0.config Write file r0.config on host 172.154.2.2? [confirm] Writing r0.config TFTP: error code 2 received - Access denied [Failed] Well there is no ACL on any of the routers. I have looked+searched on Cisco website, nothing so far.... Group please help me. Regards Arjun Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43955&t=43951 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
