I'm a little confused by configs I see in production that appear to be contrary to how I think HSRP works. What is the significance of the preempt statement on Switch #2 in this example below ??? Is it- without the preempt statement on the second switch (even though it has the lower priority), the HSRP priority would not change back if Switch #1 flapped a few times ??? ex: Switch #1
inter vlan 1 10.10.10.1 255.255.255.0 standbye priority 255 preempt standbye IP 10.10.10.3 standby track vlan 101 Switch #2 inter vlan 1 10.10.10.2 255.255.255.0 standbye priority 254 standbye IP 10.10.10.3 standby track vlan 102 Thanks Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44762&t=44762 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
