Thanx for getting back to me so fast Priscilla. I guess I should have been more specific. These are serial subinterfaces. I have about 100 other subinterfaces config'd on the same physical interface. Here is what I mean:
NYCB128_HubFrame#config t Enter configuration commands, one per line. End with CNTL/Z. NYCB128_HubFrame(config)#int s5/0.102 NYCB128_HubFram(config-subif)#ipx network AB4B NYCB128_HubFram(config-subif)#ipx typ NYCB128_HubFram(config-subif)#ipx type-20-propagation NYCB128_HubFram(config-subif)#^Z NYCB128_HubFrame# NYCB128_HubFrame#s ru ! interface Serial5/0.102 point-to-point description 384K connection to NYCB022ELMONT bandwidth 384 ip address 192.168.152.1 255.255.255.252 ip mtu 1500 ip summary-address eigrp 100 0.0.0.0 0.0.0.0 5 no ip mroute-cache frame-relay interface-dlci 152 class VoIP-384k ! interface Serial5/0.103 point-to-point description 384K connection to NYCB038EMEADOW bandwidth 384 ip address 192.168.168.1 255.255.255.252 ip mtu 1500 ip summary-address eigrp 100 0.0.0.0 0.0.0.0 5 no ip mroute-cache ipx network ABFA ipx type-20-propagation frame-relay interface-dlci 103 class Data-384K And so on and so on..........See what I mean? It lets me config the interface, but doesn't show up in the config. -Gene Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45480&t=45477 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
