Check out page 819 of Doyle Vol 1. "ip local policy route-map" HTH
> -----Original Message----- > From: Chuck [mailto:[EMAIL PROTECTED]] > Sent: Sunday, June 02, 2002 12:36 PM > To: [EMAIL PROTECTED] > Subject: Policy routing - directly connected interfaces [7:45628] > > > Continued policy routing testing of a customer network > simulation in my lab > has revealed something of interest to me. Can't find a > revelation in the > config and command references on CCO. > > I have a policy set up such that packets with a particular > source address > and a particular destination address are treated in various manners. > > debug ip policy is showing me that the policy is doing > exactly what I want > it to do EXCEPT when the destination address is a directly connected > network. > > that is, if the destination is a network on some other > router, with a route > in the routing table, everything is fine. the next hop is set > appropriately, > and the debug shows that policy is applied properly. > > however, when the destination is a directly connected network > ( either a > loopback or a LAN interface ) policy routing is not engaged. > > true? experience? reference? as I said, can't find anything in the > documentation on CCO. > > Chuck Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=45645&t=45628 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
