on the 3030 make sure you are manually specifying lan to lan (Local Network and Remote Network) using "USE IP ADDRESS/WILDCARD MASK BELOW).
While you normally don't have to do this (you can "autodiscover") Just do it to test if this is the problem. Also make sure you have both isakmp enable outside isakmp enable inside yes i mean both. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46347&t=46343 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
