I don't have both the isakmp statements in my PIX, why do I need it on both interfaces when the crypto map is on only the outside? Also I have two other PIX working OK with the only the one statement
Cheers Pat -- email me on : [EMAIL PROTECTED] ""Brunner Joseph"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > on the 3030 make sure you are manually specifying lan to lan > (Local Network and Remote Network) using "USE IP ADDRESS/WILDCARD > MASK BELOW). > > While you normally don't have to do this (you can "autodiscover") > Just do it to test if this is the problem. > > Also make sure you have both > > isakmp enable outside > isakmp enable inside > > yes i mean both. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=46440&t=46343 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
