My question is - why does it have to be Cisco?  If you want edge density,
Cisco doesn't have the best solution.  Try a Juniper/Unisphere ERX1440.

Oh whoops -  I forgot, I'm not allowed to mention the evil 'J' on this
NG....



""Chuck""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> ""Chuck""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > must be nice to have so much money. these all data lines? why in the
world
> > would they not use channelized DS3 at the center? hell of a LOT
> > cheaper!!!!!!!! Your telco account manager bying a new boat this summer?
> >
> >
> > density will be a problem. 7206's with the PA-MC-8T1 cards - that will
> give
> > you 64xT1 per box. you do the math.
>
> CL: because obviously I can't  :->  make that 48 T1's per box I would
> suggest a 7509 or so, but then you run into issues with too much on one
box
> and all the additinal overhead cost to provision those suckers.
>
> >
> > HTH
> >
> > Chuck
> >
> >
> >
> >
> >
> >
> >
> > ""Vajira Wijesinghe""  wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi Group,
> > >
> > > I have a client who needs 188 T1 (all 1.544Mb serial lines)
terminations
> > > to be done on the central site.
> > > Network is hub and spoke fashion.
> > > Pls advise the suitable Cisco router/routers on the central site, for
> > > this purpose.
> > >
> > > Thanks.
> > > ----------------------------------------- (on postoffice)
> > >
> > > The information contained in this email is confidential and is meant
to
> be
> > > read only by the person to whom it is addressed.Please visit
> > > http://www.millenniumit.com/legal/email.htm to read the entire
> > > confidentiality clause.
> > >
> > > ---------------------------------------------------------




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=47962&t=47944
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to