I just checked I'm using an RSP2 in a 7005. Does that help?
""Daniel Cotts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Let me start with what is documented and then ask if anyone is doing it > differently. > First off the 7010 is a five slot chassis. It originally shipped with a > route processor (RP), and a switch processor (SP). Later versions had a > silicon switch processor (SSP). > The 7000 is from the same family as the 7010. It has seven slots. Again it > used the RP and SP/SSP pair. > As previously posted, the IOS updates for the RP ended at 11.2. > When Cisco introduced the 7500 series it created an upgrade for the existing > 7000/7010 boxes. That was the RSP7000 / RSP7000CI set of cards. Note that > the routing function and the switching function moved to one card. See: > http://www.cisco.com/univercd/cc/td/doc/product/core/cis7000/routeswi/25617r > sp.htm > Some are available. Often the RSP7000CI board, which contains all of the > environmental monitoring functions is missing. I doubt that is an issue for > lab use. > The RSP7000 runs current IOS. > > The 7500 series replaced the 7010 with the 7505. The 7000 became the 7507. > IIRC The 7505 shipped with an RSP1 card, the 7507 had an RSP2. > Patrick's post sent me to CCO. The 7505 does support the RSP1, RSP2, RSP4, > and RSP8. See the following: > http://www.cisco.com/univercd/cc/td/doc/product/core/cis7505/rte_swit/index. > htm > > The 7000s had the CX buss, the 7500s the CY buss. Interface cards designed > for the CX buss will work in the 7500s (with some exceptions. Usually > resolved with a later version of the card.) > > I have not looked at the connectors on the rear of an RSP7000 vs an RSP2 or > RSP4. My guess is that they are different because of the different busses. > Anyone know? Anyone use an RSP2 in a 7000? If so, my prayers are answered. > If not, anyone have a RSP7000 set at a reasonable price? > > > -----Original Message----- > > From: Patrick Bass [mailto:[EMAIL PROTECTED]] > > Sent: Monday, July 01, 2002 11:43 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Cisco 7010 router help [7:47893] > > > > > > I've got RSP7000/7500 version 12.1.15 ent/fw/ids/56 version, > > 16f/64r, the > > filename is rsp-jo3sv56i-mz.121-15.bin... you need a cco > > account to get it, > > and i suppose a cco account with the right privs. In any event, I'm > > guessing it will work on a 7010. i'm using a 7005 with an rsp2... > > > > > > ""Kazan, Naim"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > This is off the topic but can you help me with what version > > of IOS is > > > support by the 7010 router. I was told before end of sale > > of 7010 router, > > > the highest ios version was 11.0. Is that correct or can I > > DL 12.0 version > > > to 7010 router. The router is for home lab use only. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48062&t=47893 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
