That was a common approach back in the heydays of the 5500s!! No spanning issues unless you disable spanning ;)
Dave Mohsin Hussain wrote: > > I have two Cat5505 with Supervisor III with two GIGBIT uplinks on each > switch. The Super IIIs do not support GIG EtherChannel. > > In order to address single point of failure between these switches, chould I > add another Super III on each switch and connect all the ports. Will this > will create spanning tree issues. Also are there issues when connecting > SuperIII uplinks to SuperIII uplinks? > > Can anyone suggest solution? > > Thanks -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49541&t=49530 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
