Hi all ....
I can't connect to another router over ISDN using BRI1 ... the following
is from a 'debug isdn events' I don't understand the 'Call was hung up' part
??? Hopefully this means that my end is Ok .. and the other end has an issue
that needs to be resolved ...
Can anyone please enlighten me :)
Kind regards
Paul ...
C4500-1#ping 10.209.31.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.209.31.1, timeout is 2 seconds:
ISDN BR0: Outgoing call id = 0x8FD2
ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
ISDN BR1: received HOST_INFORMATION.
ISDN Event: B channel assigned by switch
ISDN BR1: received HOST_DISCONNECT
ISDN BR1: Event: Call to 0123456789 was hung up..
ISDN BR0: Outgoing call id = 0x8FD3
ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
ISDN BR1: received HOST_INFORMATION.
ISDN Event: B channel assigned by switch
ISDN BR1: received HOST_DISCONNECT
ISDN BR1: Event: Call to 0123456789 was hung up..
ISDN BR0: Outgoing call id = 0x8FD4
ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
ISDN BR1: received HOST_INFORMATION.
Success rate is 0 percent (0/5)
C4500-1#
ISDN Event: B channel assigned by switch
ISDN BR1: received HOST_DISCONNECT
ISDN BR1: Event: Call to 0123456789 was hung up.
C4500-1#
C4500-1#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49548&t=49548
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
