Cheers Scott ....
I forgot to mention that the ISDN connection is a point to point
connection from our Main Office (MO) to a Branch Office (BO) So no SPID
issues here ..... I have a dialer-map at the MO and assume that the BO too,
has a dialer-map .... I have configured another similiar ISDN point to point
between the MO and another BO with success. However, this situation is
really confusing me ..... I will reload the router as you suggest tomorrow
night .. and hope that makes a difference .. If not .. I guess it's back to
the old drawing board :)
Thankx again ..
Regards
Paul ...
----- Original Message -----
From: "CCIE #9340"
To:
Sent: Wednesday, July 24, 2002 7:41 PM
Subject: Re: ISDN call hanging up ??? [7:49548]
> Possibly a SPID issue. Do a "show isdn status" and see if the spids are
> valid. Assuming you replaced the number listed in the debug. You may
also
> want to try "debug isdn q921"--it will most likely give you a more
definite
> direction to go in.
>
> These isdn issues are sometimes tricky. I have seen cards not work that
are
> fixed with a simple reload of the router.
>
> HTH,
> Scott
>
> ""Paul"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all ....
> >
> > I can't connect to another router over ISDN using BRI1 ... the
> following
> > is from a 'debug isdn events' I don't understand the 'Call was hung up'
> part
> > ??? Hopefully this means that my end is Ok .. and the other end has an
> issue
> > that needs to be resolved ...
> >
> > Can anyone please enlighten me :)
> >
> > Kind regards
> >
> > Paul ...
> >
> > C4500-1#ping 10.209.31.1
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 10.209.31.1, timeout is 2 seconds:
> >
> > ISDN BR0: Outgoing call id = 0x8FD2
> > ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> > ISDN BR1: received HOST_INFORMATION.
> > ISDN Event: B channel assigned by switch
> > ISDN BR1: received HOST_DISCONNECT
> > ISDN BR1: Event: Call to 0123456789 was hung up..
> > ISDN BR0: Outgoing call id = 0x8FD3
> > ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> > ISDN BR1: received HOST_INFORMATION.
> > ISDN Event: B channel assigned by switch
> > ISDN BR1: received HOST_DISCONNECT
> > ISDN BR1: Event: Call to 0123456789 was hung up..
> > ISDN BR0: Outgoing call id = 0x8FD4
> > ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
> > ISDN BR1: received HOST_INFORMATION.
> > Success rate is 0 percent (0/5)
> > C4500-1#
> > ISDN Event: B channel assigned by switch
> > ISDN BR1: received HOST_DISCONNECT
> > ISDN BR1: Event: Call to 0123456789 was hung up.
> > C4500-1#
> > C4500-1#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49577&t=49548
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
