Your "do" command is this.... router(config)#downward-compatible-config ? . Version number
router(config)#downward-compatible-config ----- Original Message ----- From: "Moffett, Ryan" To: Sent: Friday, July 26, 2002 10:46 AM Subject: RE: Check this new command out [7:49717] > I have the "do" command in config mode (in c3640-i-mz.122-5d.bin), but the > output is only: > > router(config)#do ? > . Version number > > -----Original Message----- > From: Dan Penn [mailto:[EMAIL PROTECTED]] > Sent: Friday, July 26, 2002 11:19 AM > To: [EMAIL PROTECTED] > Subject: RE: Check this new command out [7:49717] > > > Yes, I'm not sure what platforms it does work on, I tried it on 2500's, > 2600's and 4500's with no luck > > Dan > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > MADMAN > Sent: Friday, July 26, 2002 8:16 AM > To: [EMAIL PROTECTED] > Subject: Re: Check this new command out [7:49717] > > Priscilla Oppenheimer wrote: > > > > MADMAN wrote: > > > > > > Thought this was pretty cool!! > > > > > > c7304(config)#do sh ver > > > > Cool! Can you do stuff other than show version while in config mode?? > > > > Yes it appears you can do most anything, I tried a sh mem, sh config | > inclu, sh ip route, they all work. I don't know when/if this will be > available in released IOS, I tried it on a 7200 running the latest 12.2.10a, > no cigar. > > Dave > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49798&t=49717 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
