On 3620 with 12.2(8)T5 works:
R1(config)#do ?
LINE Exec Command
R1(config)#do show mem
Head Total(b) Used(b) Free(b) Lowest(b)
Largest(b)
Processor 62702520 18864864 9399224 9465640 9249100
9412936
I/O 3900000 7340056 4821752 2518304 2518304
2518044
Moffett, Ryan wrote:
>
> I have the "do" command in config mode (in
> c3640-i-mz.122-5d.bin), but the
> output is only:
>
> router(config)#do ?
> . Version number
>
> -----Original Message-----
> From: Dan Penn [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 26, 2002 11:19 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Check this new command out [7:49717]
>
>
> Yes, I'm not sure what platforms it does work on, I tried it on
> 2500's,
> 2600's and 4500's with no luck
>
> Dan
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
> Behalf Of
> MADMAN
> Sent: Friday, July 26, 2002 8:16 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Check this new command out [7:49717]
>
> Priscilla Oppenheimer wrote:
> >
> > MADMAN wrote:
> > >
> > > Thought this was pretty cool!!
> > >
> > > c7304(config)#do sh ver
> >
> > Cool! Can you do stuff other than show version while in
> config mode??
> >
>
> Yes it appears you can do most anything, I tried a sh mem, sh
> config |
> inclu, sh ip route, they all work. I don't know when/if this
> will be
> available in released IOS, I tried it on a 7200 running the
> latest 12.2.10a,
> no cigar.
>
> Dave
> --
> David Madland
> Sr. Network Engineer
> CCIE# 2016
> Qwest Communications Int. Inc.
> [EMAIL PROTECTED]
> 612-664-3367
>
> "Emotion should reflect reason not guide it"
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49795&t=49717
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
