""Jim Brown"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Make sure you can enter some commands under the BGP process. Just defining > the process in the config doesn't mean the IOS supports it. >
CL: good advice. on the 3550 there are lots of places where you can even enter commands, and the commands will show up in the running config, and not work. IS-IS is one of those. Access-lists in the 700 range are another. CL: The docs contain a section called "unsupported commands" which should be read thoroughly. > -----Original Message----- > From: Dan Penn [mailto:[EMAIL PROTECTED]] > Sent: Saturday, August 31, 2002 1:56 AM > To: [EMAIL PROTECTED] > Subject: RE: 3550 EMI [7:52430] > > > Just tried it out: > > Switch(config)#router bgp 1 > Switch(config-router)# > > Yep, this version has BGP, doesn't have IS-IS yet. > > Dan > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Eric Rogers > Sent: Saturday, August 31, 2002 12:13 AM > To: [EMAIL PROTECTED] > Subject: 3550 EMI [7:52430] > > A new IOS has just been released for the 3550 - 12.1.11.EA1. Looks like > it > came just in time for the new lab format too. Will this have BGP? What > else > will this have? The documentation has not been posted yet. Just in time > to > practice for the weekend anyhow. In any event it looks like the lab will > be > moving from 6 to 8 full routers come Nov. > > -Eric Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52444&t=52430 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
