I am trying to create an access-list rule on a router, to deny telnet access
from a router to anywhere except another particular routers IP address.
using the following
access-list 1 permit 10.10.10.1
line vty 0 4
access-class out 1
However it doesnt seem to work. I have tryed inbound filters and they seem
to work fine, restricting incoming connections fromspecif addresses. Is it
something I am doing incorrect.
Anyone any idea's
Kind regards.
paul.
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lower Baggot Street, Dublin 2.
> * Mob : +353 86 8143310
E-mail: [EMAIL PROTECTED]
PLEASE NOTE THAT THE ABOVE IS CONFIDENTIAL INFORMATION I
> See what you can do www.o2.ie
>
****************************************************************************************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify [EMAIL PROTECTED] or
telephone ++ 353 1 6095000.
*****************************************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52535&t=52535
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
