This is correct when access-list is working as filter in the interface, but this doesn't affect to access-class in vty.
I have tested in my lab, with access-class apply in vty, router shows next message when I try to connect to not allowed host: Trying 10.12.4.4 ... % Connections to that host not permitted from this terminal Regards Rafa -----Mensaje original----- De: bi.s [mailto:[EMAIL PROTECTED]] Enviado el: lunes 2 de septiembre de 2002 17:51 Para: [EMAIL PROTECTED] Asunto: Re: inbound vty [7:52535] re, checked it: http://www.systemtoolbox.com/article.php?articles_id=93 6. Access lists do not apply to traffic originating from the router. They only apply to traffic passing through the router. hth -birgit Casey, Paul (6822) wrote: > I am trying to create an access-list rule on a router, to deny telnet access > from a router to anywhere except another particular routers IP address. > > using the following > > access-list 1 permit 10.10.10.1 > > line vty 0 4 > access-class out 1 > > However it doesnt seem to work. I have tryed inbound filters and they seem > to work fine, restricting incoming connections fromspecif addresses. Is it > something I am doing incorrect. > > Anyone any idea's ********************************************** Noticia legal Este mensaje electrsnico contiene informacisn de BT Ignite Espaqa S.A.U. que es privada y confidencial, siendo para el uso exclusivo de la persona (s) o entidades arriba mencionadas. Si usted no es el destinatario seqalado, le informamos que cualquier divulgacisn, copia, distribucisn o uso de los contenidos esta prohibida. Si usted ha recibido este mensaje por error, por favor borre su contenido lo antes posible. Gracias. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52594&t=52535 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
