Hi, I am trying to configure my NTP server on the cisco 7505 router.
The configuration which I did is as follows: router#ntp master 10 router#ntp peer 192.168.0.72 192.168.0.72 is the address of the Windows 2000 client which I am using. I am getting the following o/p for "sh ntp associations" router#sh ntp associations address ref clock st when poll reach delay offset disp *~127.127.7.1 127.127.7.1 9 21 64 377 0.0 0.00 16000 ~192.168.0.72 0.0.0.0 16 - 1024 0 0.0 0.00 16000 I don't know why my client(windows 2000) is not getting synced? I also tried to connect a Solaris machine and the result is the same.It seems that ntp is not getting broadcasted from cisco router. I am not using authentication and access lists.Just two commands as shown above.Is that enough or something else is required at the router end. I am sure that something else is wrong in my config It will be greatful if anybody can throw some light into this. Thanks, Jay __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55836&t=55836 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
