try using a spectrum analyser to determine if there is a strong RF interference from somewhere close by....this is probably ur best bet.
Tunde ----- Original Message ----- From: "Cisco Breaker" To: Sent: Thursday, November 21, 2002 9:04 AM Subject: Wireless 350 bridge problem [7:57827] > Hi All, > > We have installed Aironet 350 series bridges 2 months ago. They were working > fine until yesterday. Bridges are on the top of two buildings and they > were and are clearly seeing each other, freshnel zone okey. But yesterday > morning the network was gone. We have controlled the settings and set up the > bridges again. Checked that if they can see each other, yes. But it doesn't > work. Bridge link down. Then we have changed the rate to only 1 Mbit, found > a really clear channel and it started to work but really in a bad mood. The > client bridge was associating and then disappearing every 1 minute. Now the > wireless network is down. > > Has anybody faced a problem like this? > > Any help will be highly appreciated. > > Best regards, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57834&t=57827 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
