""Cisco Breaker"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > We cannot afford that equipment right now. Also ran the diagnostic test to > find the clear channel, we found the channel but bridges didn't work.
CL: can you afford to have your network down? for how long? forever? CL: joys of wireless - works great until someone else in the neighborhood decides to put one in. Or some equipment that radiates harmonics of the wireless band. Or puts up a concrete wall or grows a tree. CL: it shouldn't be too hard to find a company with the spectrum analyzer who wil come out for an hour on a time and materials basis. barring that, you are left with trial and error - change the bridge locations and see if that changes for the better. > > Best regards, > > > > ""Tunde Kalejaiye"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > try using a spectrum analyser to determine if there is a strong RF > > interference from somewhere close by....this is probably ur best bet. > > > > Tunde > > > > > > ----- Original Message ----- > > From: "Cisco Breaker" > > To: > > Sent: Thursday, November 21, 2002 9:04 AM > > Subject: Wireless 350 bridge problem [7:57827] > > > > > > > Hi All, > > > > > > We have installed Aironet 350 series bridges 2 months ago. They were > > working > > > fine until yesterday. Bridges are on the top of two buildings and they > > > were and are clearly seeing each other, freshnel zone okey. But > yesterday > > > morning the network was gone. We have controlled the settings and set up > > the > > > bridges again. Checked that if they can see each other, yes. But it > > doesn't > > > work. Bridge link down. Then we have changed the rate to only 1 Mbit, > > found > > > a really clear channel and it started to work but really in a bad mood. > > The > > > client bridge was associating and then disappearing every 1 minute. Now > > the > > > wireless network is down. > > > > > > Has anybody faced a problem like this? > > > > > > Any help will be highly appreciated. > > > > > > Best regards, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57837&t=57827 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
