I also tried "debug serial interface", only see myseq , other side are always 0, also the "show interface serial" shows the number interface resets and carrier transition are increasing all the time.
Thanks ----- Original Message ----- From: "Wei Zhu" To: "Leo Song" ; Sent: Wednesday, December 18, 2002 6:37 PM Subject: Re: 2514 serial port flipping between up and down, hel [7:59426] > Actually I am using DCE/DTE back to back connecting to another router(which is tested good), the line protocol is up and down continuously and count for interface resets is increasing all the time, does that mean the serial ports are bad? > > Thanks > > ----- Original Message ----- > From: "Leo Song" > To: "'Wei Zhu'" ; > Sent: Wednesday, December 18, 2002 11:50 AM > Subject: RE: 2514 serial port flipping between up and down, hel [7:59426] > > > > Did you try to replace the v.35 cable? > > > > Leo > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > > Wei Zhu > > Sent: Wednesday, December 18, 2002 9:45 AM > > To: [EMAIL PROTECTED] > > Subject: 2514 serial port flipping between up and down, hel [7:59426] > > > > Just got one from eBay, the AUI is OK, but could not get the serials > > work, > > tried different speed, sometime at 56000 worked but not stable, other > > speed > > didn't work at all. Any suggestion? > > > > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59501&t=59501 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
