Hi all, I have a 3662 router with four NM-1E2W modules. In each of those modules is a WIC-1DSU integrated T1 CSU/DSU module, thus giving me Serial 1/0, 2/0, 3/0, and 4/0. All four of those T1s are up and operational, but I have a SNMP management web page that's not showing them as being up because SNMP is showing:
interfaces.ifTable.ifEntry.ifDescr.1 = Serial1/0 interfaces.ifTable.ifEntry.ifDescr.2 = Serial2/0 interfaces.ifTable.ifEntry.ifDescr.3 = Serial3/0 interfaces.ifTable.ifEntry.ifDescr.4 = Serial4/0 .. interfaces.ifTable.ifEntry.ifOperStatus.1 = notPresent(6) interfaces.ifTable.ifEntry.ifOperStatus.2 = notPresent(6) interfaces.ifTable.ifEntry.ifOperStatus.3 = notPresent(6) interfaces.ifTable.ifEntry.ifOperStatus.4 = notPresent(6) I can't figure out why their status would be "notPresent" when it should be "up". I have a 3640 with the same integrated T1 modules that shows "up" for the serial ports. Does anybody know what might be wrong? Thanks, James Willard [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60633&t=60633 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
