Have you tried directly a snmpwalk from a linux? but I don't think you have a problem with the monitoring a station because is working fine with the other router. It sounds like a software problem, try to check in TAC what bugs your version has and keep us informed....
James Willard wrote: > > Hi all, > > I have a 3662 router with four NM-1E2W modules. In each of > those modules > is a WIC-1DSU integrated T1 CSU/DSU module, thus giving me > Serial 1/0, > 2/0, 3/0, and 4/0. All four of those T1s are up and > operational, but I > have a SNMP management web page that's not showing them as > being up > because SNMP is showing: > > interfaces.ifTable.ifEntry.ifDescr.1 = Serial1/0 > interfaces.ifTable.ifEntry.ifDescr.2 = Serial2/0 > interfaces.ifTable.ifEntry.ifDescr.3 = Serial3/0 > interfaces.ifTable.ifEntry.ifDescr.4 = Serial4/0 > .. > interfaces.ifTable.ifEntry.ifOperStatus.1 = notPresent(6) > interfaces.ifTable.ifEntry.ifOperStatus.2 = notPresent(6) > interfaces.ifTable.ifEntry.ifOperStatus.3 = notPresent(6) > interfaces.ifTable.ifEntry.ifOperStatus.4 = notPresent(6) > > I can't figure out why their status would be "notPresent" when > it should > be "up". I have a 3640 with the same integrated T1 modules that > shows > "up" for the serial ports. Does anybody know what might be > wrong? > > Thanks, > > James Willard > [EMAIL PROTECTED] > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60634&t=60633 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
