-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Does not work. Pls state the tcp port you want map per internal ip
As in
(off the top of m hat)
ip nat inside source static tcp 10.22.5.4 25 209.10.248.134 25
ip nat inside source static tcp 10.22.5.5 80 209.10.248.134 80
Can also use interface ethernet1 or dialer1 as in
ip nat inside source static tcp 10.22.5.4 25 interface dialer1 25
Ofcourse introduced after somewhere 11.2???
Martijn
- -----Oorspronkelijk bericht-----
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens Router Kid
Verzonden: zaterdag 1 februari 2003 15:47
Aan: [EMAIL PROTECTED]
Onderwerp: NAT QUESTION [7:62313]
Please can someone tell me if multiple Private Static IPs can be NAT'ed to
one Public IP address. when i try to did that it gave me an error "
Router(config)#ip nat inside source static 10.22.5.5 209.10.248.x %
209.10.248.x already mapped (10.22.5.4 -> 209.10.248.x)
- ----------------------
This is what i am trying to acheive.
ip nat inside source static 10.22.5.4 209.10.248.134
ip nat inside source static 10.22.5.5 209.10.248.134 (want to add this
entry)
Thanks in Advance!
Version: PGP 8.0
iQA/AwUBPjvvE3dq56XWk+VyEQIltgCeO+LWICqQGRAqYS0ZADucixLEURMAoKvo
0pzzIySMB3sPOly/XK+nwhB2
=u8LN
-----END PGP SIGNATURE-----
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62314&t=62313
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
