Hi Xy, I had sent you configuration information for the LS100 using NSAPs and thought you had it working now. Is this a new issue? If so it should be a straight matter of just setting up a bidirectional pvc on the ls100 for your pvc. Bear in mind there are reserved ranges for vpi's/vci's when configuring your pvc.
Thanks, Ian www.ccie4u.com Rack rentals and lab scenarios -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Xy Hien Le Sent: Monday, March 17, 2003 9:15 AM To: [EMAIL PROTECTED] Subject: ATM LS100 PROBLEM! [7:65585] Hi all, I have an LS100 ATM LIGHTSTREAM (NOT LS1010) in between 2 ATM routers configured as follow: interface ATM2/0 ip address 10.1.1.2 255.255.255.0 ip ospf network point-to-multipoint map-group atm atm pvc 1 0 16 ilmi atm pvc 2 2 48 aal5snap no atm ilmi-keepalive map-list atm ip 10.1.1.1 atm-vc 2 broadcast ATM SWITCH LS100 IN BETWEEN interface ATM2/0 ip address 10.1.1.1 255.255.255.0 ip ospf network point-to-multipoint map-group atm atm pvc 1 0 16 ilmi atm pvc 2 2 49 aal5snap no atm ilmi-keepalive map-list atm ip 10.1.1.2 atm-vc 2 broadcast ! I don't know how to configure the LS100 LIGHTSTREAM SWITCH to connect the 2 routers. Can someone with the experience of LS100 send me a configuration of this switch? Thank you all in advance. Xy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65624&t=65585 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
