Hi Xy, Here is a sample command to add pvc 2/48 to the ls100 ports #0 and #2
pvc est 1 2 0 2 48 512 0 155 2 2 48 512 0 155 Thanks, Ian http://www.ccie4u.com -----Original Message----- From: Xy Hien Le [mailto:[EMAIL PROTECTED] Sent: Monday, March 17, 2003 11:36 PM To: [EMAIL PROTECTED] Subject: Re: ATM LS100 PROBLEM! [7:65585] Hi Ian, Thanks for your help previously. The configuration for NSAP was working. This is a new issue. I tried to connect the 2 routers as stated via the LS100 for PVC connection. I have no idea how to do it with the LS100. Could you please do a sample according to the configuration of the 2 ATM routers as stated in my posted email? I don't know how to set up a bidirectional pvc on the ls100 at all, it keep giving me the error message of illegal number!!! Please help. Thanks, Xy ----- Original Message ----- From: "Sales" To: "'Xy Hien Le'" ; Sent: Monday, March 17, 2003 5:17 PM Subject: RE: ATM LS100 PROBLEM! [7:65585] > Hi Xy, > > I had sent you configuration information for the LS100 using NSAPs and > thought you had it working now. Is this a new issue? If so it should > be a straight matter of just setting up a bidirectional pvc on the ls100 > for your pvc. Bear in mind there are reserved ranges for vpi's/vci's > when configuring your pvc. > > > Thanks, > > Ian > > www.ccie4u.com > Rack rentals and lab scenarios > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of > Xy Hien Le > Sent: Monday, March 17, 2003 9:15 AM > To: [EMAIL PROTECTED] > Subject: ATM LS100 PROBLEM! [7:65585] > > Hi all, > > I have an LS100 ATM LIGHTSTREAM (NOT LS1010) in between 2 ATM routers > configured as follow: > > interface ATM2/0 > ip address 10.1.1.2 255.255.255.0 > ip ospf network point-to-multipoint > map-group atm > atm pvc 1 0 16 ilmi > atm pvc 2 2 48 aal5snap > no atm ilmi-keepalive > > map-list atm > ip 10.1.1.1 atm-vc 2 broadcast > > > ATM SWITCH LS100 IN BETWEEN > > > > interface ATM2/0 > ip address 10.1.1.1 255.255.255.0 > ip ospf network point-to-multipoint > map-group atm > atm pvc 1 0 16 ilmi > atm pvc 2 2 49 aal5snap > no atm ilmi-keepalive > > map-list atm > ip 10.1.1.2 atm-vc 2 broadcast > ! > > I don't know how to configure the LS100 LIGHTSTREAM SWITCH to connect > the 2 > routers. > Can someone with the experience of LS100 send me a configuration of this > switch? > > Thank you all in advance. > > Xy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65627&t=65585 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
