Sorry for the stupid question... After adding that line to "/etc/rc.local", did you reboot your system?
The above may not be the best way, it is just what worked for me. Tim > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:clamav-users- > [EMAIL PROTECTED] On Behalf Of Scott Woodford > Sent: 08 June 2005 20:42 > To: 'ClamAV users ML' > Subject: RE: [Clamav-users] ERROR: Clamuko: Can't register with Dazuko > > By the way Tim, adding the following lines to "/etc/rc.local" did not > help. > > > #Inserts Dazuko as a module > modprobe dazuko > > #Starts clamd > /usr/sbin/clamd > > When I try to run the example program, it says "error: failed to register > with Dazuko". As soon as I enter the command "/sbin/insmod ./dazuko.o", > the > example program starts working again. I tried that command in the > rc.local > file, but that didn't work. > > > Scott J. Woodford > Information Systems Security Manager > Modern Technology Solutions, Inc. > (703) 212-8870 Ext. 146 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Timothy Omer > Sent: Wednesday, June 08, 2005 2:26 PM > To: 'ClamAV users ML' > Subject: RE: [Clamav-users] ERROR: Clamuko: Can't register with Dazuko > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:clamav-users- > > [EMAIL PROTECTED] On Behalf Of Scott Woodford > > Sent: 08 June 2005 19:13 > > To: 'ClamAV users ML' > > Subject: RE: [Clamav-users] ERROR: Clamuko: Can't register with Dazuko > > > > Thanks Tim. I have read (and practically memorized) the entire > > clamdoc.pdf file. I am very familiar with 4.1.1 and 5.3. Anyway, I > > was able to figure out my problem, but I have another. > > > > My problem was that dazuko was not initializing after I restarted the > > machine. I have no idea why. Any idea on how to change that? > > > > Also, I cannot get the "VirusEvent" line in clamd.conf to work properly. > > Onacess is working great, because it finds my test virus, but I get no > > notification such as "Virus found". I have uncommented the VirusEvent > > line and it's still not working. Any ideas? > > > > > > Scott J. Woodford > > Information Systems Security Manager > > Modern Technology Solutions, Inc. > > (703) 212-8870 Ext. 146 > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Timothy > > Omer > > Sent: Wednesday, June 08, 2005 1:58 PM > > To: 'ClamAV users ML' > > Subject: RE: [Clamav-users] ERROR: Clamuko: Can't register with Dazuko > > > > > > > > Hi all, > > > > > > I'm having trouble getting Clamuko working. My system is RedHat 9.0. > > > I installed Dazuko just fine, and was able to run the example > > > program with no problems. I also got ClamAV installed fine, and > > > tested it without fail. > > > I > > > edited clamd.conf, and enabled the following: > > > > > > ClamukoScanOnAccess > > > ClamukoScanOnOpen > > > ClamukoScanOnExec > > > > > > I used a test virus, and Clamuko didn't pick it up. I tried running > > > clamd just for the heck of it, and it shows "ERROR: Clamuko: Can't > > > register with Dazuko" in the log file. Any ideas? Thanks in > > > advance for any help you can give me. > > > > > > Scott > > > > > > > > > _______________________________________________ > > > http://lurker.clamav.net/list/clamav-users.html > > [Timothy Omer] > > > > Have you looked at the clamav doc? Located here: > > http://www.clamav.net/doc/0.85.1/clamdoc.pdf > > > > Read 4.1.1 and 5.3 (if you have the time read it all!) > > > > Tim > > > > _______________________________________________ > > http://lurker.clamav.net/list/clamav-users.html > > > > > > > > _______________________________________________ > > http://lurker.clamav.net/list/clamav-users.html > [Timothy Omer] > > I had the same problem :-), looking at the log /var/log/clamav/clamd.log I > found that Dazuko was being loaded after clamd. > > To start Dazuko and reload clamd I added this to /etc/rc.local > > #Inserts Dazuko as a module > modprobe dazuko > > #Starts clamd > /usr/sbin/clamd > > (maybe not the best way, I am new to this!) > > The "VirusEvent" line in clamd.conf does not work with Clamuko (As clamd > uses that config file not Clamuko) > > I use this in my crontab to email me when Clamuko finds a virus... > > #Does a scan with clamav @ 2am, sends email if there is a problem 0 2 * * > * > /usr/local/bin/clamscan --no-summary --infected -i -r / || mail -s "A > virus > has been found on the Office Server" [EMAIL PROTECTED] > > Hope this helps, > > Tim > > _______________________________________________ > http://lurker.clamav.net/list/clamav-users.html > > > _______________________________________________ > http://lurker.clamav.net/list/clamav-users.html _______________________________________________ http://lurker.clamav.net/list/clamav-users.html
