Bruce we are running 4.1.2. I have shut down CCA server one (primary) and left CCA server 2 running. Should I cleanly shut down both? Then start up CCA server2? I am surprised this is not working. Our students are not happy...
Bob On 4/7/08 12:45 PM, "Osborne, Bruce W. (NS)" <[EMAIL PROTECTED]> wrote: > Bob, > > If the failed server is offline, reboot the other one. If the HA pair > are not directly connected, but thorough a dedicated vlan, I have seen > HA only work if the active CAS is cleanly shut down. Disaster failover > does not appear to work, at least in 4.1.1, unless there is a direct > connection. Perhaps it needs the linkup / linkdown. > > Bruce Osborne > Liberty University > > -----Original Message----- > From: Cisco Clean Access Users and Administrators > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Lavner > Sent: Monday, April 07, 2008 12:40 PM > To: [email protected] > Subject: [CLEANACCESS] CCA server forced failover > > Due to a hardware problem on the Primary CCA server, it failed and our > students cannot get DHCP info thus not getting out to the network. The > secondary CCA server is not performing this task. Is there a way to > force > the secondary to perform as the primary? Can this be done through CLI? > Any > info would be appreciated. > > Bob Lavner > Network/Server Manager > Assumption College > 508-767-7006 > [EMAIL PROTECTED]
