Abaco, I saw your email - it's good to hear you've got Ralf trying to connect to the CDF.
Over the last few months, I think there have been a few fixes in Ralf to make it more standards-compliant - in particular - https://github.com/Metaswitch/ralf/commit/d30a254309265dd0f0b8009264a4ae1ff842c75a - which corrected Ralf to register Rf as an accounting application (rather than an authentication application) - https://github.com/Metaswitch/ralf/commit/982f593da833b1779c84f87e09b7330f0e4ec96b - which corrected Ralf to register Rf as base application 3, not application 3 under the 3GPP vendor namespace. I think UCTCDF would need tweaking to bring it into line with the standards - my quick hack a few months ago was just to bring it into line with Ralf which, as noted above, was not fully standards-compliant at the time. I would try modifying https://github.com/mirw/uctimscharging/blob/master/UCTCDF/cdf.xml - where it says "<Auth id="3" vendor="10415"/>", I think it should say something like "<Acct id="3"/>" - or maybe "<Acct id="3" vendor="0"/>"? Having said that, I haven't tested this at all, so it's a bit of a guess. As I said back in May, even when fully working it doesn't crack out much detail and seems to lock up quite a bit. Please let me know if you do manage to get this working! Thanks, Matt -- Matt Williams Software Development Manager, Project Clearwater +44 (0) 20 8366 1177 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ruggero Schiavi Sent: 24 September 2014 13:45 To: Eleanor Merry Cc: [email protected] Subject: Re: [Clearwater] Ralf diameter realm Hi Ellie, I set now the DNS correctly and Ralf finds the CDF and tries to initiate a Diameter connection. Looking in the mail archive I downloaded this basic CDF patched by Matt Williams. https://github.com/mirw/uctimscharging I set the parameters and the the software receives the capabilities exchange but answers with the DIAMETER_NO_COMMON_APPLICATION this, I suppose, is the reason for which Ralf is not sending ACRs. I know that this software is not yours and I don't want to waste your time but since in May the solution even if buggy was working for Matt Williams I would like to know if something changed (in Clearwater) or If I misconfigured something. Thank you in advance for any help you can provide, Abaco 2014-09-19 14:41 GMT+02:00 Eleanor Merry <[email protected]>: > Hi Abaco, > > Ralf should attempt NAPTR resolution on the diameter realm. > What DNS entries have you set up for your Clearwater nodes? Can you > please send me the ralf debug logs (in /var/log/ralf/*) for an > attempted resolution? > > Thanks, > > Ellie > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Ruggero > Schiavi > Sent: 16 September 2014 16:15 > To: [email protected] > Subject: [Clearwater] Ralf diameter realm > > Hi, > We are going to configure Ralf with the diameter realm. > In the guide is mentioned that is possible to have a DNS realm > resolution with NAPTR -> SRV/A -> IPv4 address or directly a > resolution with a collection of A records. > I noticed that RALF is doing a resolution with NAPTR queries, is this > correct? > > Sorry to bother, thank you for any help, > > Best Regards, > > Abaco > _______________________________________________ > Clearwater mailing list > [email protected] > http://lists.projectclearwater.org/listinfo/clearwater > _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
