Hi Salil, The 401 disconnection is a 401 response sent as part of a REGISTER flow. In an initial registration, we expect the client to do a REGISTER with no authentication credentials. This then gets rejected with a 401 (which contains a WWW-authenticate header). The client will then resend the REGISTER with the appropriate authorization. Clearwater will then accept this and return a 200 OK.
The 0 disconnection corresponds to a BYE. The sprout errors show that Sprout is attempting to send an ACR to Ralf, and this is failing. Do you have a Ralf and a CDF (not part of Project Clearwater) in your deployment? If you don't then you can remove the ralf_hostname setting from your /etc/clearwater/config on Sprout and Bono. I think the successful_call count=0 is a SIPP quirk. The 'call' is the stress scenario of REGISTERs and INVITEs (in the call_load2.xml script), rather than an individual call made as part of the stress test. This is looped, and so never finishes - so both successful and failed calls are 0. Can you please send me the logs from your stress run though (in /var/log/clearwater-sip-stress/*) and I'll take a look through them. Ellie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Salil Sharma Sent: 12 February 2015 00:01 To: [email protected] Subject: [Clearwater] Stress Test query Dear Developers, While stress testing clearwater with clearwater-sip-stress on an aio setup, I checked my bono logs and I am sharing some of them with you, kindly explain me, what is the difference REASON=401 & REASON=0, call disconnection. 08-02-2015 09:05:33.079 UTC Call-Connected: FROM=sip:[email protected] TO=sip:[email protected]_ID=2010000010-1.000000/// [email protected] 08-02-2015 09:05:33.580 UTC Call-Disconnected: CALL_ID=2010000032/// [email protected] REASON=401 08-02-2015 09:05:33.588 UTC Call-Disconnected: CALL_ID=2010000033/// [email protected] REASON=401 08-02-2015 09:05:57.127 UTC Call-Disconnected: CALL_ID=2010000010-1.000000///[email protected] REASON=0 Some sprout logs are as follows;- (Kindly explain them, and what is the solution to this) 08-02-2015 09:01:28.132 UTC Error httpconnection.cpp:573: http://192.168.2.18:10888/call-id/2010000028%2F%2F%2F11-12402%40192.168.4.60 failed at server 192.168.2.18 : Couldn't connect to server (7) : fatal 08-02-2015 09:01:28.132 UTC Error httpconnection.cpp:688: cURL failure with cURL error code 7 (see man 3 libcurl-errors) and HTTP error code 404 08-02-2015 09:01:28.132 UTC Warning acr.cpp:627: Failed to send Ralf ACR message (0x7f2fc03dfa70), rc = 404 08-02-2015 09:01:28.133 UTC Error httpconnection.cpp:573: http://192.168.2.18:10888/call-id/2010000028%2F%2F%2F11-12402%40192.168.4.60 failed at server 192.168.2.18 : Couldn't connect to server (7) : fatal 08-02-2015 09:01:28.134 UTC Error httpconnection.cpp:688: cURL failure with cURL error code 7 (see man 3 libcurl-errors) and HTTP error code 404 08-02-2015 09:01:28.134 UTC Warning acr.cpp:627: Failed to send Ralf ACR message (0x7f2fb04a3880), rc = 404 08-02-2015 09:01:28.134 UTC Error httpconnection.cpp:573: http://192.168.2.18:10888/call-id/2010000028%2F%2F%2F11-12402%40192.168.4.60 failed at server 192.168.2.18 : Couldn't connect to server (7) : fatal 08-02-2015 09:01:28.134 UTC Error httpconnection.cpp:688: cURL failure with cURL error code 7 (see man 3 libcurl-errors) and HTTP error code 404 At the same time homer logs speak as 2015-02-08 09:05:27,064 UTC INFO base:246 Received request from localhost - GET http://http_homer/org.etsi.ngn.simservs/users/sip%3A2010000010%40example.com/simservs.xml 2015-02-08 09:05:27,065 UTC INFO base:259 Sending 200 response to localhost for GET http://http_homer/org.etsi.ngn.simservs/users/sip%3A2010000010%40example.com/simservs.xml 2015-02-08 09:05:27,068 UTC INFO base:246 Received request from localhost - GET http://http_homer/org.etsi.ngn.simservs/users/sip%3A2010000011%40example.com/simservs.xml 2015-02-08 09:05:27,070 UTC INFO base:259 Sending 200 response to localhost for GET http://http_homer/org.etsi.ngn.simservs/users/sip%3A2010000011%40example.com/simservs.xml At homestead 08-02-2015 09:05:27.063 UTC 200 PUT /impu/sip%3A2010000010% 40example.com/reg-data 0.001471 seconds 08-02-2015 09:05:27.066 UTC 200 GET /impu/sip%3A2010000011% 40example.com/location 0.000022 seconds 08-02-2015 09:05:27.067 UTC 200 PUT /impu/sip%3A2010000011% 40example.com/reg-data 0.001053 seconds 08-02-2015 09:05:27.072 UTC 200 PUT /impu/sip%3A2010000011% 40example.com/reg-data 0.001784 seconds 08-02-2015 09:05:33.576 UTC 200 GET /impi/2010000032% 40example.com/registration-status 0.000024 seconds 08-02-2015 09:05:33.578 UTC 200 GET /impi/2010000032%40example.com/av 0.001082 seconds 08-02-2015 09:05:33.581 UTC 200 GET /impi/2010000032% 40example.com/registration-status 0.000017 seconds 08-02-2015 09:05:33.582 UTC 200 PUT /impu/sip%3A2010000032% 40example.com/reg-data 0.000986 seconds Secondly, I have noticed this that how small value you take it as 'count', and how longer I run the test, I never get a successful call. I tried with count=50, and ran the wireshark in background, recorded the sip-flow, and observed that:- 1. Registration do take place 2. 200 OK is received 3. counts & other files get update for the clearwater-sip-stress (in logs) 4. But the Call Target=25, remains constant, so does the successful call=0 remains. (I ran it for more than 2 hrs). I don't know where is the problem. I am really doing it correct or did I escaped some part. -- Salil Sharma * <[email protected]>* _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
