Hi All,
I need to ask few questions regarding stress testing for manual
installation of clearwater. I am following http://clearwater.
readthedocs.io/en/stable/Clearwater_stress_testing.html for stress testing.
I have set the* local_ip of this node* only in
* /etc/clearwater/local_config. *I also set *reg_max_expires=1800* in all
the other node in *shared_config *after that I created the 50000 no. in
vellum node as given in doc
https://github.com/Metaswitch/crest/blob/dev/docs/Bulk-Provisioning%
20Numbers.md?utf8=%E2%9C%93
and then I install the debian package *sudo apt-get install
clearwater-sip-stress-careonly *on new node.
when I run
/usr/share/clearwater/bin/run_stress <home_domain> 1800 2
Starting initial registration, will take 22 seconds
Initial registration succeeded
Starting test
Test complete
Elapsed time: 00:02:00
Start: 2018-03-14 18:06:06.635672
End: 2018-03-14 18:08:06.714723
Total calls: 39
Successful calls: 0 (0.0%)
Failed calls: 39 (100.0%)
Unfinished calls: 0
Retransmissions: 0
Average time from INVITE to 180 Ringing: 0.0ms
# of calls with 0-2ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 2-10ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 10-20ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 20-50ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 50-100ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 100-200ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 200-500ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 500-1000ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 1000-2000ms from INVITE to 180 Ringing: 0 (0.0%)
# of calls with 2000+ms from INVITE to 180 Ringing: 0 (0.0%)
Failed: call success rate 0.0% is lower than target 100.0%!
Total re-REGISTERs: 120
Successful re-REGISTERs: 120 (100.0%)
Failed re-REGISTERS: 0 (0.0%)
REGISTER retransmissions: 0
Average time from REGISTER to 200 OK: 30.0ms
Log files at /var/log/clearwater-sip-stress/13921_*
1. I have not mention new node's IP in any other node of clearwater, how
the other node know about it?
My question is, *Do I need to mention the IP of new node in any other node
of clearwater?*
when I run -
[]ubuntu@stress:~$ /usr/share/clearwater/bin/run_stress <home_domain> 1800
10 --icscf-target TARGET=sprout.{domain}:5052 --scscf-target
TARGET=sprout.{domain}:5054
Starting initial registration, will take 22 seconds
Initial registration failed - see /var/log/clearwater-sip-
stress/14115_initial_reg_errors.log for details of the errors
*[]ubuntu@stress:/var/log/clearwater-sip-stress$ tail -30
14115_initial_reg_errors.log*
sipp: The following events occured:
2018-03-14 18:11:06.637370 1521031266.637370: Unknown remote host
'TARGET=sprout.<domain>' (Name or service not known, Inappropriate ioctl
for device).
Use 'sipp -h' for details.
*[]ubuntu@stress:/var/log/clearwater-sip-stress$ cat 9923_caller_errors.log*
2018-03-14 00:32:45.274812 1520967765.274812: Aborting call on
unexpected message for Call-Id '[email protected]': while expecting '183'
(index 2), received 'SIP/2.0 503 Service Unavailable
Via: SIP/2.0/TCP 127.0.1.1:34015;received=10.224.61.13;branch=z9hG4bK-9937-
54-0
Record-Route: <sip:scscf.sprout. <home_domain> ;transport=TCP;lr;billing-
role=charge-term>
Record-Route: <sip:scscf.sprout. <home_domain> ;transport=TCP;lr;billing-
role=charge-orig>
Call-ID: [email protected]
From: <sip:2010000252@<home_domain>>;tag=9937SIPpTag0054
To: <sip:2010000647@ <home_domain> >;tag=z9hG4bKPjJVqopmpeih7pUoxJrYOG7
CO4-Bm69ozI
CSeq: 1 INVITE
P-Charging-Vector: icid-value="9937SIPpTag0054";orig-ioi=<home_domain>;term-
ioi=<home_domain>
P-Charging-Function-Addresses: ccf=0.0.0.0
Content-Length: 0
'.
Regards,
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
