Hi All, I need to ask few questions regarding stress testing for manual installation of clearwater. I am following http://clearwater.readthedocs.io/en/stable/Clearwater_stress_testing.html for stress testing. I have set the* local_ip of this node* only in* /etc/clearwater/local_config. *I also set *reg_max_expires=1800* in all the other node in *shared_config *after that I created the 50000 no. in vellum node as given in doc
https://github.com/Metaswitch/crest/blob/dev/docs/Bulk-Provisioning%20Numbers.md?utf8=%E2%9C%93 and then I install the debian package *sudo apt-get install clearwater-sip-stress-careonly *on new node. when I run /usr/share/clearwater/bin/run_stress <home_domain> 1800 2 Starting initial registration, will take 22 seconds Initial registration succeeded Starting test Test complete Elapsed time: 00:02:00 Start: 2018-03-14 18:06:06.635672 End: 2018-03-14 18:08:06.714723 Total calls: 39 Successful calls: 0 (0.0%) Failed calls: 39 (100.0%) Unfinished calls: 0 Retransmissions: 0 Average time from INVITE to 180 Ringing: 0.0ms # of calls with 0-2ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 2-10ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 10-20ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 20-50ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 50-100ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 100-200ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 200-500ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 500-1000ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 1000-2000ms from INVITE to 180 Ringing: 0 (0.0%) # of calls with 2000+ms from INVITE to 180 Ringing: 0 (0.0%) Failed: call success rate 0.0% is lower than target 100.0%! Total re-REGISTERs: 120 Successful re-REGISTERs: 120 (100.0%) Failed re-REGISTERS: 0 (0.0%) REGISTER retransmissions: 0 Average time from REGISTER to 200 OK: 30.0ms Log files at /var/log/clearwater-sip-stress/13921_* 1. I have not mention new node's IP in any other node of clearwater, how the other node know about it? My question is, *Do I need to mention the IP of new node in any other node of clearwater?* when I run - []ubuntu@stress:~$ /usr/share/clearwater/bin/run_stress <home_domain> 1800 10 --icscf-target TARGET=sprout.{domain}:5052 --scscf-target TARGET=sprout.{domain}:5054 Starting initial registration, will take 22 seconds Initial registration failed - see /var/log/clearwater-sip-stress/14115_initial_reg_errors.log for details of the errors *[]ubuntu@stress:/var/log/clearwater-sip-stress$ tail -30 14115_initial_reg_errors.log* sipp: The following events occured: 2018-03-14 18:11:06.637370 1521031266.637370: Unknown remote host 'TARGET=sprout.<domain>' (Name or service not known, Inappropriate ioctl for device). Use 'sipp -h' for details. *[]ubuntu@stress:/var/log/clearwater-sip-stress$ cat 9923_caller_errors.log* 2018-03-14 00:32:45.274812 1520967765.274812: Aborting call on unexpected message for Call-Id '[email protected]': while expecting '183' (index 2), received 'SIP/2.0 503 Service Unavailable Via: SIP/2.0/TCP 127.0.1.1:34015 ;received=10.224.61.13;branch=z9hG4bK-9937-54-0 Record-Route: <sip:scscf.sprout. <home_domain> ;transport=TCP;lr;billing-role=charge-term> Record-Route: <sip:scscf.sprout. <home_domain> ;transport=TCP;lr;billing-role=charge-orig> Call-ID: [email protected] From: <sip:2010000252@<home_domain>>;tag=9937SIPpTag0054 To: <sip:2010000647@ <home_domain> >;tag=z9hG4bKPjJVqopmpeih7pUoxJrYOG7CO4-Bm69ozI CSeq: 1 INVITE P-Charging-Vector: icid-value="9937SIPpTag0054";orig-ioi=<home_domain>;term-ioi=<home_domain> P-Charging-Function-Addresses: ccf=0.0.0.0 Content-Length: 0 '. Regards, Sunil
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
