You need to apply the following patch from the click git sources: click.git/etc/linux-2.6.24.7-patch
Do you see this problem every time you run click on the e1000? Piers. 2009/1/22 <[email protected]>: > Thank you, but it seems that the attached patch work with linux.2.6.24.7, > i have applyed it and nothing has changed. Actually, i did not found a > patch of Click for linux.2.6.24.7, so i am using linux-2.6.16.13 for which > seems to be a very old and buggy version. So, do you advise me to use > linux.2.6.24.7, in this case, where can i find the corresponding click > patch? or, is there any other solution with linux-2.6.16.13? > > >> There seems to be a problem with the click.git 7.3.20 version - I >> managed to fix it (attached patch - against git e1000-7.x/src) but I >> also found that the newer version of the driver (e1000-7.6.15) with >> this patch works on linux.2.6.24.7: >> http://www.mail-archive.com/[email protected]/msg01868.html >> >> Also you might want try git version if you're not already... >> >> Piers O'Hanlon >> >> 2009/1/21 <[email protected]>: >>> Hi everybody,I am a new Click user. I am using the 7.3.20-NAPI e1000 >>> driver. >>> I have the following error when running udpgen.click : >>> >>> e1000_poll_on >>> click: starting router thread pid 5063 (ffff81006bb3cdc0) >>> e1000: eth0: e1000_reset: Hardware Error >>> ToDevice eth0 rejected a packet! >>> e1000: eth0: e1000_watchdog1: NIC Link is Down >>> e1000: eth0: e1000_reset: Hardware Error >>> >>> Can you help me, I've been stuck for a long time!! >>> Thanks >>> >>> _______________________________________________ >>> click mailing list >>> [email protected] >>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click >>> >> > > > _______________________________________________ click mailing list [email protected] https://amsterdam.lcs.mit.edu/mailman/listinfo/click
