I am using linux-2.6.24.7 now and it works!! Thank you very much!! > You need to apply the following patch from the click git sources: > click.git/etc/linux-2.6.24.7-patch > > Do you see this problem every time you run click on the e1000? > > Piers. > > 2009/1/22 <[email protected]>: >> Thank you, but it seems that the attached patch work with >> linux.2.6.24.7, >> i have applyed it and nothing has changed. Actually, i did not found a >> patch of Click for linux.2.6.24.7, so i am using linux-2.6.16.13 for >> which >> seems to be a very old and buggy version. So, do you advise me to use >> linux.2.6.24.7, in this case, where can i find the corresponding click >> patch? or, is there any other solution with linux-2.6.16.13? >> >> >>> There seems to be a problem with the click.git 7.3.20 version - I >>> managed to fix it (attached patch - against git e1000-7.x/src) but I >>> also found that the newer version of the driver (e1000-7.6.15) with >>> this patch works on linux.2.6.24.7: >>> http://www.mail-archive.com/[email protected]/msg01868.html >>> >>> Also you might want try git version if you're not already... >>> >>> Piers O'Hanlon >>> >>> 2009/1/21 <[email protected]>: >>>> Hi everybody,I am a new Click user. I am using the 7.3.20-NAPI e1000 >>>> driver. >>>> I have the following error when running udpgen.click : >>>> >>>> e1000_poll_on >>>> click: starting router thread pid 5063 (ffff81006bb3cdc0) >>>> e1000: eth0: e1000_reset: Hardware Error >>>> ToDevice eth0 rejected a packet! >>>> e1000: eth0: e1000_watchdog1: NIC Link is Down >>>> e1000: eth0: e1000_reset: Hardware Error >>>> >>>> Can you help me, I've been stuck for a long time!! >>>> Thanks >>>> >>>> _______________________________________________ >>>> click mailing list >>>> [email protected] >>>> https://amsterdam.lcs.mit.edu/mailman/listinfo/click >>>> >>> >> >> >> >
_______________________________________________ click mailing list [email protected] https://amsterdam.lcs.mit.edu/mailman/listinfo/click
