> I've setup slime to remote repl according to > http://asymmetrical-view.com/2009/08/20/emacs-slime-remote-repl.html > So far so good (there are some issues, but that other time). > > There is a problem with reconnecting to the remote machine after the > connection is broken (running on wifi). I have tried also to telnet (at the > remote machine) to the specified port and connection refused :( > > So I have kill the REPL every time is happens and of course I am loosing all > the testing stuff in repl. > > Anyone having same problems? Solutions?
Lukas, If you've lost your network connection, you will probably need to both re-establish the ssh port forward (i.e. kill the ssh connection -- try <enter> ~ .), and run M-x slime-disconnect from your local Emacs. When the network connection is lost you will likely have to set up all the parts again - though when I've done it before swank continues to listen and I can re-establish the port forward and connect again. In that article I advise against making the swank listener bind to a port that is open to the internet, which is why I have the example off using ssh port forwarding. After your network connectivity returns, can you ssh into the remote machine again? Let us know how it goes. Regards, Kyle -- You received this message because you are subscribed to the Google Groups "Clojure" group. To post to this group, send email to clojure@googlegroups.com Note that posts from new members are moderated - please be patient with your first post. To unsubscribe from this group, send email to clojure+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/clojure?hl=en
