Hi List,
Sorry if this question has been asked before, we are unable to search the list
archives. Apologies for the long post.
We're using clonezilla-1.1.0-8 on Centos5 with the following filesystems:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md0 5080728 1729984 3088488 36% /
/dev/md1 893093512 413656 846581388 1% /vz
and /dev/md2 is used as swap.
These are made up of 4 x 320GB disks (sda, sdb, sdc, and sdd), on top of which
we have configured with Software RAID as:
==========<snip>==========
/dev/md0:
Raid Level : raid1
Array Size : 5245120 (5.00 GiB 5.37 GB)
Raid Devices : 2
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
/dev/md1:
Raid Level : raid5
Array Size : 921969408 (879.26 GiB 944.10 GB)
Raid Devices : 4
Layout : left-symmetric
Chunk Size : 256K
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
1 8 18 1 active sync /dev/sdb2
2 8 34 2 active sync /dev/sdc2
3 8 50 3 active sync /dev/sdd2
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
/dev/md2:
Raid Level : raid1
Array Size : 5245120 (5.00 GiB 5.37 GB)
Raid Devices : 2
Number Major Minor RaidDevice State
0 8 33 0 active sync /dev/sdc1
1 8 49 1 active sync /dev/sdd1
==========<snip>==========
We are trying to save images of the 4 disks. When we ran Clonezilla, it was
able to successfully (AFAIK) save an image of sda1, but it encountered an error
when it tried to save an image of sda2:
==========<snip>==========
Checking file system integrity in /dev/sda2... done!
Use lzop to compress the image.
Split image file with size limit 2000MB
*****************************************************.
Volume size: 0 bytes (0 MiB)
partimage: status: initializing the operation.
partimage: status: Partimage: 0.6.1
partimage: status: Image type: NONE
partimage: status: Saving partition to the image file...
partimage: status: reading partition properties
There was an error while reading the bitmap.
partimage: status: commiting buffer cache to disk.
==========<snip>==========
It then goes on to save images of sdb1 and sdb2, but we had to cancel since it
was saving over ssh and was taking a really long time to finish.
We connected an external USB drive and tried again. It encountered the same
error on the same partition. It's now saving sdb2 and we're still waiting for
it to finish.
Any hints as to why it's not able to save sda2 ?
We'll be happy to send more info about our setup, if anyone needs it.
TIA,
-eric
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Clonezilla-live mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/clonezilla-live
