On Sunday 07 September 2008 09:35:28 pm Steven Shiau wrote:
> When you run dmesg did you find anything about your CD ?
> Did you mean you want to mount the CD burner as /home/partimag ?
> If so, you have to do that manually. You can refer to this:
> http://www.sysresccd.org/Sysresccd-manual-en_Burning_a_DVD%2BRW_from_System
>RescueCd_by_mounting_it The required programs are included in Clonezilla
> live.
>
> Steven.
>
> ka1ifq wrote:
> > I am using Clonezilla live 1.1.0-8, when I boot (to ram) , switch out
> > the media, and try to do an image of disk I do not see the cd drive that
> > I booted the system from (HP cd burner w/blank media) to save the image
> > to. Can this be due to the fact that the hd is master on cotroller port 0
> > and the burner is master on port 1? Do the drives have to be contiguous
> > to be seen.
> > thanks, binzer
> >
Hi Steven,
Thanks for the info, tried the commends from the link, the format
worked ok
but the mkudffs comes up with an error, ( trying to change type of multiple
extents) tried it on 2 systems, one with Clonezilla and another under Suse
with the same results, I also tried with no options and had same result.
command: mkudffs --lvid="dvd-backup" --udfrev=0x0150 /dev/sr0
Thanks..
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Clonezilla-live mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/clonezilla-live
