Morning Steven. So I rebuilt the image/clone (disk to disk), and notice very briefly while rebooting and exiting CZ, a brief message scrolled past the screen indicating something about "Duplicate Volume Group...." or something to that effect, it went by fast. But I guess this is likely normal since the VG's on the source were duplicated on the target?
I then disconnected the original source drives and booted from the cloned drive alone in the system. Once again it kernel panicked and could not find "VolGroup00" I then rebooted the CZ disk and went to the shell, and ran the following: pvscan: PV /dev/sda2 VG VolGroup 00 lvm2 [297.91 GiB / 0 free] Total:1 [297.91 GiB] / in use:1 [297.91 GiB] / in no VG: 0 [0 ] vgscan: Found Volume Group "VolGroup00" using metadata type lvm2 lvscan ACTIVE 'dev'VolGroup00/LogVol00' [20.00 Gib] inherit ACTIVE 'dev'VolGroup00/LogVol02' [233.91 Gib] inherit ACTIVE 'dev'VolGroup00/LogVol03' [20.00 Gib] inherit ACTIVE 'dev'VolGroup00/LogVol01' [20.00 Gib] inherit ACTIVE 'dev'VolGroup00/LogVol04' [4.00 Gib] inherit I also tried to boot from the new cloned drive, while the old drives/RAID-1 were attached and although it booted, I believe it did so using the VG from the original drives as I got this: found duplicate PV Rmjk001v4osy2kov4RnSPYcpux+ulurd: using /dev/sdb2 not /dev/sda2 On 4/11/2010 7:08 PM, Steven Shiau wrote: > How about if you boot Clonezilla live on the cloned machine, then run: > 1. sudo -i > 2. pvscan > 3. vgscan > 4. lvscan > > Please pot the results of 2, 3, and 4. > > Steven. > > On 2010/4/9 下午 10:55, Johnny Stork wrote: >> I have tried dd from a LIve Ubuntu disk, and now clonezilla-live to >> create an identical image of a RAID-1 array with 2 mirrored drives, onto >> a single SATA drive. However, both methods still cant seem to boot and >> have trouble finding the logical volumes? Maybe I am not using Clonzilla >> correclty, or its simply not possible. I would be so grateful if someone >> could let me know if this is possible with clonezilla. >> >> Below is what I tried from the Ubuntu Live disk but I also tried with >> Clonezilla following the onscreen prompts. >> >> Niether method seems to be able to find the local volume/groups at boot. >> >> >> >> I have a CentOS 5.4 server with a 3ware 9500 SATA Raid card with 2x320 >> gb drives as RAID-1. >> >> Setup included logical volumes, physical drive is seen as /dev/sda >> >> This is what fdisk sees: >> >> r...@gateway:~# fdisk -l >> >> Disk /dev/sda: 319.9 GB, 319988695040 bytes >> 255 heads, 63 sectors/track, 38903 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System >> /dev/sda1 * 1 13 104391 83 Linux >> /dev/sda2 14 38903 312383925 8e Linux LVM >> >> >> >> What I am trying to do is remove the 3ware RAID and run the system off a >> single 320gb SATA drive which is attached. >> >> >> So I plugged in a basic SiL Raid card with a single 320gb drive >> >> Booted Ubuntu Live and old RAID-1 array on the 3ware card is seen as >> /dev./sdb >> >> The new, single 320gb drive seen as /dev/sda >> >> From a terminal I ran >> >> dd if=/dev/sdb of=/dev/sda >> >> copy finished with no errors >> >> Unplugged the 2x320gb drives on the 3ware controller >> >> Booted system, grub loaded (giving me so much false hope) >> >> then, the boot failed at... >> >> Volume group "VolGroup00" not found >> unable to access resume device (/dev/VolGroup00/LogVol04) >> Mount: could not find filesystem '/devroot' >> >> >> So the problem seems to be that the LVM's are not seen? >> >> Is there another, or better way to make a compelte, and working mirror >> of a drive containing logical volumes? >> >> >> When I reboot back in the working system, with the RAID on the 3ware >> card, this is what both drives now look like to fdisk. >> >> r...@gateway:~# fdisk -l >> >> Disk /dev/sda: 319.9 GB, 319988695040 bytes (3ware working RAID) >> 255 heads, 63 sectors/track, 38903 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System >> /dev/sda1 * 1 13 104391 83 Linux >> /dev/sda2 14 38903 312383925 8e Linux LVM >> >> Disk /dev/sdb: 320.0 GB, 320072933376 bytes (Non-booting single drive on >> Sil card) >> 255 heads, 63 sectors/track, 38913 cylinders >> Units = cylinders of 16065 * 512 = 8225280 bytes >> >> Device Boot Start End Blocks Id System >> /dev/sdb1 * 1 13 104391 83 Linux >> /dev/sdb2 14 38903 312383925 8e Linux LVM >> > -- Johnny Stork ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Clonezilla-live mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/clonezilla-live
