Yes, this should be Linux kernel related issue. Linux kernel 3.2.2 will be available in Debian Sid these days, and we will create another Clonezilla live with this updated kernel. It might solve this issue. Please be patient for the next testing release.
Steven. On 2012/2/1 上午 04:32, Paul Van Allsburg wrote: > Hi! > I have a pair of C1103 servers with two NVIDIA M2090 compute GPUs in each. > (http://www.sgi.com/products/servers/standard_depth/1u_intel_2p.html > C1103-TY12 ) > I ran into an Oops message using clonezilla-live-1.2.8-23-amd64 so I upgraded > to clonezilla-live-1.2.12-10-amd64 today. I can > now pxe backup& restore just fine. I've used 1.2.8-23-amd64 for several > months on older hardware without any problems and it > wasn't until I installed the M2090 cards that the Oops happened. Anyway, the > reason I write is that I get repeating messages on > the console like this: > > [ 73.575316] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > [ 74.309436] [drm] nouveau 0000:03:00.0: unknown i2c port 48 > [ 83.565604] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > [ 84.299664] [drm] nouveau 0000:03:00.0: unknown i2c port 48 > > I'm making the assumption that the Nouveau driver doesn't quite recognize the > M2090 cards and is just grumpy and complaining. > Since it is working, I'll just report this behavior as something to be aware > of. > > Here is the initial messages from dmsg > > > [ 21.973986] [drm] Initialized drm 1.1.0 20060810 > [ 22.044913] nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> > IRQ 24 > [ 22.066332] nouveau 0000:02:00.0: setting latency timer to 64 > [ 22.067402] [drm] nouveau 0000:02:00.0: Detected an NVc0 generation card > (0x0c8880a1) > [ 22.088768] checking generic (f5000000 1000000) vs hw (c8000000 8000000) > [ 22.088770] checking generic (f5000000 1000000) vs hw (c6000000 2000000) > [ 22.091689] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from > PRAMIN > [ 22.122455] [drm] nouveau 0000:02:00.0: ... BIOS signature not found > [ 22.143366] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from > PROM > [ 22.451914] [drm] nouveau 0000:02:00.0: ... appears to be valid > [ 22.471826] [drm] nouveau 0000:02:00.0: BIT BIOS found > [ 22.491131] [drm] nouveau 0000:02:00.0: Bios version 70.10.46.00 > [ 22.510088] [drm] nouveau 0000:02:00.0: TMDS table version 2.0 > [ 22.528614] [drm] nouveau 0000:02:00.0: Found Display Configuration Block > version 4.0 > [ 22.530805] eth1: no IPv6 routers present > [ 22.547317] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000000 > [ 22.565930] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 0000000e 00020030 > [ 22.584072] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 > 16 4 > [ 22.601893] [drm] nouveau 0000:02:00.0: 0: 0x00000000: type 0x00 idx 0 > tag 0xff > [ 22.619752] [drm] nouveau 0000:02:00.0: Adaptor not initialised, running > VBIOS init tables. > [ 22.638167] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at > offset 0x723E > [ 22.676465] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.694278] [drm] nouveau 0000:02:00.0: 0x71B9: Failed parsing init table > opcode: INIT_I2C_IF -19 > [ 22.712466] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.730703] [drm] nouveau 0000:02:00.0: 0x720D: i2c bus not found > [ 22.749174] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.767752] [drm] nouveau 0000:02:00.0: 0x721D: i2c bus not found > [ 22.786544] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.805441] [drm] nouveau 0000:02:00.0: 0x7224: i2c bus not found > [ 22.824102] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.842244] [drm] nouveau 0000:02:00.0: 0x722B: i2c bus not found > [ 22.860111] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.877495] [drm] nouveau 0000:02:00.0: 0x7232: i2c bus not found > [ 22.934534] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at > offset 0x7900 > [ 22.975694] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 22.991703] [drm] nouveau 0000:02:00.0: 0x8BBD: Failed parsing init table > opcode: INIT_I2C_LONG_IF -19 > [ 23.023138] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at > offset 0x8DF6 > [ 23.039274] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at > offset 0x8E00 > [ 23.055078] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at > offset 0x9074 > [ 23.070283] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset > 0x90D9 > [ 23.104977] [drm] nouveau 0000:02:00.0: unknown i2c port 51 > [ 23.119370] [drm] nouveau 0000:02:00.0: 1 available performance level(s) > [ 23.133526] [drm] nouveau 0000:02:00.0: 0: core 50MHz shader 101MHz memory > 135MHz timing 6 > [ 23.147986] [drm] nouveau 0000:02:00.0: c: core 50MHz shader 101MHz memory > 135MHz voltage 890mV > [ 23.167199] [TTM] Zone kernel: Available graphics memory: 12368584 kiB. > [ 23.181507] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. > [ 23.195625] [TTM] Initializing pool allocator. > [ 23.209860] [drm] nouveau 0000:02:00.0: Detected 5376MiB VRAM > [ 23.224394] mtrr: type mismatch for c8000000,8000000 old: write-back new: > write-combining > [ 23.239627] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) > [ 23.446645] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 23.462140] [drm] No driver support for vblank timestamp query. > [ 23.477982] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > [ 23.538082] No connectors reported connected with modes > [ 23.553919] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 23.570785] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x1e0000, > bo ffff880631506000 > [ 23.587208] checking generic (f5000000 1000000) vs hw (c8000000 8000000) > [ 23.587209] checking generic (f5000000 1000000) vs hw (c6000000 2000000) > [ 23.587332] fb1: nouveaufb frame buffer device > [ 23.603662] drm: registered panic notifier > [ 23.619805] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on > minor 0 > [ 23.619825] nouveau 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> > IRQ 30 > [ 23.619829] nouveau 0000:03:00.0: setting latency timer to 64 > [ 23.620968] [drm] nouveau 0000:03:00.0: Detected an NVc0 generation card > (0x0c8880a1) > [ 23.620973] checking generic (f5000000 1000000) vs hw (d8000000 8000000) > [ 23.620975] checking generic (f5000000 1000000) vs hw (d6000000 2000000) > [ 23.624057] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from > PRAMIN > [ 23.633751] [drm] nouveau 0000:03:00.0: ... BIOS signature not found > [ 23.633753] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from > PROM > [ 23.920160] [drm] nouveau 0000:03:00.0: ... appears to be valid > [ 23.938086] [drm] nouveau 0000:03:00.0: BIT BIOS found > [ 23.955932] [drm] nouveau 0000:03:00.0: Bios version 70.10.46.00 > [ 23.973904] [drm] nouveau 0000:03:00.0: TMDS table version 2.0 > [ 23.991884] [drm] nouveau 0000:03:00.0: Found Display Configuration Block > version 4.0 > [ 24.010139] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02000300 00000000 > [ 24.010141] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 0000000e 00020030 > [ 24.010143] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 > 16 4 > [ 24.010145] [drm] nouveau 0000:03:00.0: 0: 0x00000000: type 0x00 idx 0 > tag 0xff > [ 24.010159] [drm] nouveau 0000:03:00.0: Adaptor not initialised, running > VBIOS init tables. > [ 24.010161] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at > offset 0x723E > [ 24.030207] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030209] [drm] nouveau 0000:03:00.0: 0x71B9: Failed parsing init table > opcode: INIT_I2C_IF -19 > [ 24.030211] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030212] [drm] nouveau 0000:03:00.0: 0x720D: i2c bus not found > [ 24.030213] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030215] [drm] nouveau 0000:03:00.0: 0x721D: i2c bus not found > [ 24.030216] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030217] [drm] nouveau 0000:03:00.0: 0x7224: i2c bus not found > [ 24.030219] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030220] [drm] nouveau 0000:03:00.0: 0x722B: i2c bus not found > [ 24.030221] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.030222] [drm] nouveau 0000:03:00.0: 0x7232: i2c bus not found > [ 24.070364] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at > offset 0x7900 > [ 24.094867] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.094869] [drm] nouveau 0000:03:00.0: 0x8BBD: Failed parsing init table > opcode: INIT_I2C_LONG_IF -19 > [ 24.094871] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at > offset 0x8DF6 > [ 24.094877] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at > offset 0x8E00 > [ 24.095003] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at > offset 0x9074 > [ 24.095007] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset > 0x90D9 > [ 24.114869] [drm] nouveau 0000:03:00.0: unknown i2c port 51 > [ 24.114870] [drm] nouveau 0000:03:00.0: 1 available performance level(s) > [ 24.114873] [drm] nouveau 0000:03:00.0: 0: core 50MHz shader 101MHz memory > 135MHz timing 6 > [ 24.114957] [drm] nouveau 0000:03:00.0: c: core 50MHz shader 101MHz memory > 135MHz voltage 890mV > [ 24.119858] [drm] nouveau 0000:03:00.0: Detected 5376MiB VRAM > [ 24.119862] mtrr: type mismatch for d8000000,8000000 old: write-back new: > write-combining > [ 24.119874] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture) > [ 24.310393] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 24.310395] [drm] No driver support for vblank timestamp query. > [ 24.310400] [drm] nouveau 0000:03:00.0: unknown i2c port 48 > [ 24.354939] No connectors reported connected with modes > [ 24.354941] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 24.355850] [drm] nouveau 0000:03:00.0: allocated 1024x768 fb: 0x1e0000, > bo ffff8806328ce400 > [ 24.355852] checking generic (f5000000 1000000) vs hw (d8000000 8000000) > [ 24.355854] checking generic (f5000000 1000000) vs hw (d6000000 2000000) > [ 24.356044] fb2: nouveaufb frame buffer device > [ 24.356050] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on > minor 1 > [ 25.041780] mdadm: sending ioctl 800c0910 to a partition! > [ 25.057908] mdadm: sending ioctl 800c0910 to a partition! > [ 25.057915] mdadm: sending ioctl 1261 to a partition! > [ 25.057916] mdadm: sending ioctl 1261 to a partition! > [ 25.058246] mdadm: sending ioctl 1261 to a partition! > [ 25.058249] mdadm: sending ioctl 1261 to a partition! > [ 25.058465] mdadm: sending ioctl 1261 to a partition! > [ 25.058468] mdadm: sending ioctl 1261 to a partition! > [ 25.058667] mdadm: sending ioctl 1261 to a partition! > [ 25.058670] mdadm: sending ioctl 1261 to a partition! > [ 26.009909] fuse init (API version 7.17) > [ 26.109278] SGI XFS with ACLs, security attributes, realtime, large > block/inode numbers, no debug enabled > [ 26.156161] SGI XFS Quota Management subsystem > [ 26.197337] JFS: nTxBlock = 8192, nTxLock = 65536 > [ 27.153671] RPC: Registered named UNIX socket transport module. > [ 27.187493] RPC: Registered udp transport module. > [ 27.204355] RPC: Registered tcp transport module. > [ 27.220451] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 27.311447] FS-Cache: Loaded > [ 27.364775] FS-Cache: Netfs 'nfs' registered for caching > [ 27.395278] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). > [ 33.614269] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > [ 34.348382] [drm] nouveau 0000:03:00.0: unknown i2c port 48 > [ 43.604536] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > [ 44.338589] [drm] nouveau 0000:03:00.0: unknown i2c port 48 > [ 53.594800] [drm] nouveau 0000:02:00.0: unknown i2c port 48 > > > Here is my default boot menu options and the scripts behind it... > > From /tftpboot/pxelinux.cfg/default : > LABEL backup > MENU LABEL backup > kernel clonenbi > append initrd=nbi_img/initrd.img boot=live live-config noswap nolocales > noprompt edd=on ocs_prerun="mount -t nfs > 192.168.12.102:/home /mnt" ocs_prerun1="mount --bind /mnt/partimag > /home/partimag" ocs_live_run="bash > /home/partimag/clonebucompute11.bash" ocs_live_batch="yes" > ocs_live_extra_param="" ocs_live_keymap="NONE" ocs_lang="en_US.UTF-8" > ocs_daemonon="ssh" vga=788 nosplash > fetch=tftp://192.168.11.102/nbi_img/filesystem.squashfs > > LABEL restore > MENU LABEL restore > kernel clonenbi > append initrd=nbi_img/initrd.img boot=live live-config noswap nolocales > noprompt textonly edd=on ocs_prerun1="sleep 4" > ocs_prerun2="mount -t nfs 192.168.12.102:/home /mnt" ocs_prerun3="mount > --bind /mnt/partimag /home/partimag" ocs_live_run="bash > /home/partimag/clonerstcompute11.bash" ocs_live_batch="yes" > ocs_live_extra_param="" ocs_live_keymap="NONE" > ocs_lang="en_US.UTF-8" ocs_daemonon="ssh" vga=788 nosplash > fetch=tftp://192.168.11.102/nbi_img/filesystem.squashfs > > > # cat /home/partimag/clonebucompute11.bash > #!/bin/bash > #MENU LABEL Clonezilla Live > script -c /home/partimag/clonebackupcompute11.bash /home/partimag/`hostname > -I | cut -d" " -f1`.txt > exit > > # cat /home/partimag/clonebackupcompute11.bash > #!/bin/bash > #MENU LABEL Clonezilla Live Backup Compute Node > . /opt/drbl/sbin/drbl-conf-functions > . /opt/drbl/sbin/ocs-functions > . /etc/ocs/ocs-live.conf > if mountpoint /home/partimag/&>/dev/null; then > /opt/drbl/sbin/ocs-sr -q2 -b -j2 -z1p -i 2000 -p > /home/partimag/rm_pxe_link11 savedisk compute-node sda > else > [ "$BOOTUP" = "color" ]&& $SETCOLOR_FAILURE > echo "Fail to find the Clonezilla image home /home/partimag!" > echo "Program terminated!" > [ "$BOOTUP" = "color" ]&& $SETCOLOR_NORMAL > fi > exit > > # cat /home/partimag/rm_pxe_link11 > #!/bin/sh > mkdir /media/pxe > mount -t nfs 192.168.12.102:/tftpboot /media/pxe > rm -f "/media/pxe/pxelinux.cfg/`/home/partimag/iphex eth0`" > cd / > umount /media/pxe > umount /home/partimag > umount /mnt > init 6 > > > Many thanks for the great software! > Cheers, > Paul > > > ------------------------------------------------------------------------------ > Keep Your Developer Skills Current with LearnDevNow! > The most comprehensive online learning library for Microsoft developers > is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, > Metro Style Apps, more. Free future releases when you subscribe now! > http://p.sf.net/sfu/learndevnow-d2d > _______________________________________________ > Clonezilla-live mailing list > Clonezilla-live@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/clonezilla-live -- Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw Public Key Server PGP Key ID: 1024D/9762755A Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A ------------------------------------------------------------------------------ Keep Your Developer Skills Current with LearnDevNow! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-d2d _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
