I have been at this for a couple days now and have tried about 30 ways and
combinations to get this going will no luck.
I have a stack of HP servers and trying to clone an image on to them (note
this has worked many times with dell power edges).
I couldn't get it restoring from my image, so I decided to just do a disk
to disk clone and that too won't work.
My current setup:
HP Proliant DL380 G5
2 Disks - 73GB SAS - two logical drives (one per disk) both raid 0 - disk
1 has the OS I want to clone to disk 2 which is an empty logical drive.
1. Boot Clonezilla live version: 20140114-saucy (I was using an older
2013 version, upgrading to 2014 didn't fix)
2. enter into device-device mode
3. beginner mode (have tried various expert modes)
4. disk_to_local_disk
5. it sees both disks: cciss/c0d0 and cciss/c0d1
6. select the first, then the second (source destination)
7. skip checking/repairing source file system
8. enter
9. Error
lsblk: /dev/cciss/cd: not a block device
Unknown partition table format for file
/tmp/ocs_onthefly_local.gH10Wx/src-pt.parted!
Program terminated!!
So the above is where I am stuck now trying the disk to disk route...but
I'm having issues with any way I'm trying it with these HP's.
Thanks.
------------------------------------------------------------------------------
CenturyLink Cloud: The Leader in Enterprise Cloud Services.
Learn Why More Businesses Are Choosing CenturyLink Cloud For
Critical Workloads, Development Environments & Everything In Between.
Get a Quote or Start a Free Trial Today.
http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk
_______________________________________________
Clonezilla-live mailing list
Clonezilla-live@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/clonezilla-live
