This is correct. You can only log in as admin. Kev.
----- Original Message ----- From: "Jason Louie" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 17, 2003 9:52 AM Subject: Re: (clug-talk) IPCOP v1.3.0 No Web Login > Which account are you using to access the Web-admin stuff? I believe > that not all accounts are avaliable thourgh the web interface, including > *root*. The account you should be using is *admin*. I believe that by > default this is the only account that can access the web admin stuff. > Also be sure that the *admin* account only contains alpha-numeric > characters. Having *&[EMAIL PROTECTED]<space><tab> may not be passed correctly to > authenticate the *admin* account. I don't think you need to reinstall > once you can see the web-admin starting page. Just change the password > for *admin* when you're logged in as root. > > Hope this helps. > > Dave Watkins wrote: > > >Morning All, > > > >Just installed IPCOP on a Compaq Presario 2240 box. All seemed to go > >well during the installation with both cards being detected. I set up > >the Green card with an IP of 192.168.123.200 and can ping that address > >from both W2K boxes and a SuSE 8.2 box. When I browse to that IP with > >IE6 or Mozilla I get the web interface and the uptime notice updates > >when refresh button is pressed. The interface also accuratly reflects > >wether or not I am logged on to the IPCOP box locally as root. > > > >The problem is that I cannot log onto the IPCOP box via the Web > >interface either http or https as such http://192.168.123.200:81 or > >https:192.168.123.200:445. > > > >I have also replaced the IP address with "ipcop", the actual machine > >name. > > > >I have installed this 3 times with the same results. > > > >Any suggestions? > > > > > > -- > > Jason Louie BSc. CPSC > Web Applications Developer > Sorex Software Inc. > [EMAIL PROTECTED] > > > >
