Hi Cluggers :
Got a problem with X. I just installed an ATI Radeon VE card with 2 Dell M991 monitors (yep this is a dubbelhead setup)
I am using sax2 (SuSE 9.0) to re-configure XFree86.conf
When I compare this file with another SuSE9.0 that is HW identical -and working- I don't see a difference.
On the PC with the new installed card I get the following err when I try to "test" my config in sax2 :
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) Symbol xf86DestroyI2CBusRec from module /usr/X11R6/lib/modules/drivers/ati_drv.o is unresolved!
Symbol xf86DestroyI2CBusRec from module /usr/X11R6/lib/modules/drivers/ati_drv.o is unresolved!
*** If unresolved symbols were reported above, they might not *** be the reason for the server aborting.
Fatal server error: Caught signal 11. Server aborting
lspci gives this:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Has that "no busID" anything to do with it? Somebody got a clue?
Peter
_______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
