Can you post XF86Config and a tail of your log?
On June 16, 2004 04:36 pm, Pete wrote: > Hi Cluggers : > > Got a problem with X. > I just installed an ATI Radeon VE card with 2 Dell M991 monitors > (yep this is a dubbelhead setup) > > I am using sax2 (SuSE 9.0) to re-configure XFree86.conf > When I compare this file with another SuSE9.0 that is HW identical -and > working- I don't see a difference. > > On the PC with the new installed card I get the following err when I try > to "test" my config in sax2 : > > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (WW) Symbol xf86DestroyI2CBusRec from module > /usr/X11R6/lib/modules/drivers/ati_drv.o is unresolved! > Symbol xf86DestroyI2CBusRec from module > /usr/X11R6/lib/modules/drivers/ati_drv.o is unresolved! > > *** If unresolved symbols were reported above, they might not > *** be the reason for the server aborting. > > Fatal server error: > Caught signal 11. Server aborting > > > lspci gives this: > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY > [Radeon 7000/VE] > > Has that "no busID" anything to do with it? > Somebody got a clue? > > Peter > > > > _______________________________________________ > clug-talk mailing list > [EMAIL PROTECTED] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
