Hi Let me do my 2cents here. Check if your printer port is enabled in the bios and not on Auto. This turns off when the printer is powersaving. Your printer will still powesave, but will be shown as available (on) with the enabled port. .... I could be totally out to lunch on this one you know. Cheers Szemir
On August 13, 2004 15:25, Andrew Graupe wrote: > Pete wrote: > > Andrew Graupe wrote: > >> Jesse Kline wrote: > >>> On Fri, 2004-08-13 at 09:53, Andrew Graupe wrote: > >>>> I would like to know how to get CUPS to start my printer at startup > >>>> (I'm using gentoo). As it is, I have to go into the web-based > >>>> administration and click "Start Printer". Where/how can I change > >>>> this? > >>>> > >>>> Regards, > >>>> > >>>> Andrew > > > > I'am NOT a CUPS specialist but what about sending a http req at startup? > > > > http://localhost:631/admin/?op=start-printer&printer_name=HP8100 > > > > With wget you can pass password/UID if necc. > > > > A lame workaround that shoud do the job until someone else finds the > > real answer... > > > > Peter > > > > _______________________________________________ > > clug-talk mailing list > > [EMAIL PROTECTED] > > http://clug.ca/mailman/listinfo/clug-talk_clug.ca > > My workaround is to activate it manually. I don't reboot *that* often. > It's not windows, you know. :) I don't want to go halfway, for > something that isn't causing me major grief (I've been having this > problem for more than a month, and I only post now. That's how > important it is). > > Regards, > > Andrew > > _______________________________________________ > clug-talk mailing list > [EMAIL PROTECTED] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
