Dave Watkins wrote:
Hi Evan,
You may have to enter the screen size manually, thru YAST, or run the auto
setup on the monitor itself. Some monitors do not get recognized during
installation.
HTH
Dave Watkins
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Evan Brown
Sent: Tuesday, February 01, 2005 10:03 AM
To: CLUG General
Subject: [clug-talk] lcd monitor problem
Just got a new Samsung LCD17inch Monitor. Running Suse 9.2 after I
plugged it in the screen is too big to fit on the monitor so stuff is
cut off. Any ideas?
Evan Brown
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
Cool, thanx guys I'll give these all a try, I was thinking it may also
be the graphics card, ATI Rage Mobility P AGP 2X. The monitor is plugged
into a notebook which has a very defective screen so the LCD is pretty
much the primary display now, kinda a stop gap measure until new
notebook is affordable.
Evan
_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying
