I was looking at the 7260 with the SD options. But, I'm an utter novice in this area, so don't really know if the SD would be best or not. I'm just thinking that I have SD cards already...
Shawn Mark Carlson wrote: > Ok, the list of attendees is pretty much final now, so we should start > looking at what hardware to use. > > Here are my suggestions. I am leaning towards the TS-7260 base model. > Remember that the prices are in USD, and may end up costing an extra > 50% or more by the time it gets here. If you are attending, please > let me know which one you would prefer. I will make sure that > whatever we order will be compatible from a workshop point of view > (which is why the TS-7400 is off the list.) The TS-7300 is a little > different as well, but if someone really wants it, I can see if it > would fit into the workshop parameters. > > Again, an official list will be kept here: > http://mcarlson.ca/projects/index.php?page=Linux_SBC_Workshop > > TS-7200: http://www.embeddedarm.com/epc/ts7200-spec-p.php > ------ > * $150, or $165 with 16MB flash > * 200 MHz ARM9 processor with MMU > * 32 MB SDRAM > * 8 MB Flash disk (16 MB optional) > * 10/100 Ethernet > * Compact Flash > * 2 USB 2.0 Compatible OHCI ports (12 Mbit/s Max) > * 2 COM ports > * 20 DIO > * PC/104 expansion bus > * Optional A/D and RS-485 > > TS-7260: http://www.embeddedarm.com/epc/ts7260-spec-h.htm > ------ > * $179 or $195 for 64 MB RAM and 32 MB Flash or $230 for 64 MB RAM > and 128 MB Flash > * 200Mhz ARM9 CPU with MMU > * 32 MB SDRAM (64-128 MB optional) > * High efficiency switching-mode power supply (4.5-20VDC Unregulated > Input) > * 32 MB on-board NAND flash drive > * Standard TS-XDIO* > * Optional SD Card socket* > * Optional 2 extra TTL serial ports* > * 2 USB 2.0 Compatible (12 Mbit/s max) > * 10/100 Ethernet port > * 30 total DIO pins > * 3 standard COM ports > * Watchdog timer > * 2-channel on-board 12-bit ADC > * PC/104 expansion bus > * SPI bus interface > * Matrix Keypad and text LCD support > * Optional Battery-Backed RTC > * Optional USB 802.11g WiFi with drivers > > TS-7250: http://www.embeddedarm.com/epc/ts7250-spec-h.html > ------ > * $150 or $190 for 64 MB RAM and 128 MB Flash > * 200 MHz ARM9 processor with MMU > * 32 MB SDRAM (64 MB optional) > * 32 MB Flash disk (128MB optional) > * 10/100 Ethernet > * USB Flash drives supported > * 2 USB ports, 2 COM ports, 20 DIO > * PC/104 expansion bus > * 5 channels 12-bit A/D converter > * Optional 8 channel A/D > * Optional RS-485 > > -Mark C. > > _______________________________________________ > clug-talk mailing list > [email protected] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca > Mailing List Guidelines (http://clug.ca/ml_guidelines.php) > **Please remove these lines when replying _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
