I forgot to mention, CMPRREXX is/was a REXX filter from IBM at least as early as VMESA 2.1.0. I don't know where it lives today, except for the copy on my Tools disk, that is.
Regards, Richard Schuh > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of SPITZ, > HOBART CTR DFAS > Sent: Thursday, September 10, 2009 1:47 PM > To: [email protected] > Subject: Re: Strip /* */ type comments > > See new split. > > "PIPE (endchar ?)", > " < SYSTEM CONFIG T", > "| STRIP", > "| INSERT x01 AFTER", > "| SPLIT BEFORE STR '/*'", > "| SPLIT BEFORE STR '*/'", > "| split after str '*/'", > "| NOT BETWEEN '/*' '*/'", > "| JOINCONT NOT TRAILING x01", > "| CONSOLE" > > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of Frank M. Ramaekers > Sent: Thursday, September 10, 2009 4:37 PM > To: [email protected] > Subject: Re: [CMS-PIPELINES] Strip /* */ type comments > > This close: > > "PIPE (endchar ?)", > " < SYSTEM CONFIG T", > "| STRIP", > "| INSERT x01 AFTER", > "| SPLIT BEFORE STR '/*'", > "| SPLIT BEFORE STR '*/'", > "| NOT BETWEEN '/*' '*/'", > "| JOINCONT NOT TRAILING x01", > "| CONSOLE" > > Except for: > > Features , > > Disable , Set_Privclass , > Auto_Warm_IPL , Clear_TDisk , Enable, > Dynamic_I/O, > > Set_Devices, > > Set_Dynamic_I/O, > > New_devices_Initialized_When_Added, > > Retrieve , Default 20 , Maximum > 255 , MaxUsers noLimit , Password > s_on_Cmds , Autolog No , Link No , > Logon No , Vdisk Userlim 1440 > 00 blocks > > > Which was: > > Features , > Disable , /* Disable the following features */ > Set_Privclass , /* Disallow SET PRIVCLASS command */ > Auto_Warm_IPL , /* Prompt at IPL always */ > Clear_TDisk , /* Don't clear TDisks at IPL time */ > Enable, > Dynamic_I/O, > Set_Devices, > Set_Dynamic_I/O, > New_devices_Initialized_When_Added, > Retrieve , /* Retrieve options */ > Default 20 , /* Default.... default is 20 */ > Maximum 255 , /* Maximum.... default is 255 */ > MaxUsers noLimit , /* No limit on number of users */ > Passwords_on_Cmds , /* What commands allow passwords? */ > Autolog No , /* ... AUTOLOG does */ > Link No , /* ... LINK does */ > Logon No , /* ... and LOGON does, too */ > Vdisk Userlim 144000 blocks /* Maximum vdisk allowed per user */ > > Frank M. Ramaekers Jr. > Systems Programmer MCP, MCP+I, MCSE & RHCE > American Income Life Insurance Co. Phone: (254)761-6649 > 1200 Wooded Acres Dr. Fax: (254)741-5777 > Waco, Texas 76710 > > > > > > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of SPITZ, > HOBART CTR DFAS > Sent: Thursday, September 10, 2009 3:25 PM > To: [email protected] > Subject: Re: [CMS-PIPELINES] Strip /* */ type comments > > Sorry. I did it from memory. It's "insert x01 after", of course. > > Any suitable end of line marker will do. > > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of Frank M. Ramaekers > Sent: Thursday, September 10, 2009 4:20 PM > To: [email protected] > Subject: Re: [CMS-PIPELINES] Strip /* */ type comments > > PIPCHA060E Delimiter missing after string "AFTER x01". > PIPSCA003I ... Issued from stage 3 of pipeline 1. > PIPSCA001I ... Running "INSERT AFTER x01". > > > +------------------------------------------------------------- > ---------- > ----+ > ! | > | > ! | +-BEFORE-+ > | > ! | > >>--INSERT--delimitedString--+--------+--+------------+------- > ---------> > < | > ! | +-AFTER--+ +-inputRange-+ > | > | > | > > +------------------------------------------------------------- > ---------- > ----+ > > Frank M. Ramaekers Jr. > Systems Programmer MCP, MCP+I, MCSE & RHCE > American Income Life Insurance Co. Phone: (254)761-6649 > 1200 Wooded Acres Dr. Fax: (254)741-5777 > Waco, Texas 76710 > > > > > > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of SPITZ, > HOBART CTR DFAS > Sent: Thursday, September 10, 2009 3:13 PM > To: [email protected] > Subject: Re: [CMS-PIPELINES] Strip /* */ type comments > > ... | insert after x01 | split before '/*' | split before > '*/' | not between '/*' '*/' | joincont not trailing x01 | ... > > -----Original Message----- > From: CMSTSO Pipelines Discussion List > [mailto:[email protected]] On Behalf Of Frank M. Ramaekers > Sent: Thursday, September 10, 2009 4:03 PM > To: [email protected] > Subject: [CMS-PIPELINES] Strip /* */ type comments > > Is there a way to strip the /* */ type comments from a stream? > Same line / Partial line / Spanned lines > > Frank M. Ramaekers Jr. > Systems Programmer MCP, MCP+I, MCSE & RHCE > American Income Life Insurance Co. Phone: (254)761-6649 > 1200 Wooded Acres Dr. Fax: (254)741-5777 > Waco, Texas 76710 > > > _____________________________________________________ > > This message contains information which is privileged and > confidential and is solely for the use of the > > intended recipient. If you are not the intended recipient, be > aware that any review, disclosure, > > copying, distribution, or use of the contents of this message > is strictly prohibited. If you have > > received this in error, please destroy it immediately and > notify us at [email protected]. > > _____________________________________________________ > > This message contains information which is privileged and > confidential and is solely for the use of the > > intended recipient. If you are not the intended recipient, be > aware that any review, disclosure, > > copying, distribution, or use of the contents of this message > is strictly prohibited. If you have > > received this in error, please destroy it immediately and > notify us at [email protected]. > > _____________________________________________________ > > This message contains information which is privileged and > confidential and is solely for the use of the > > intended recipient. If you are not the intended recipient, be > aware that any review, disclosure, > > copying, distribution, or use of the contents of this message > is strictly prohibited. If you have > > received this in error, please destroy it immediately and > notify us at [email protected]. >
