This is the only reference I can find in the PIPELINES documentation:
Should You Compile Your REXX Filters?
The performance of filters that do little processing for each record
will be dominated by
the EXECCOMM processing that moves records into and out of the REXX
variable pool.
This processing takes roughly the same time for compiled and interpreted
REXX; there will
be no speed-up from compiling the examples in this chapter. On the other
hand, the
cmprrexx utility program showed a marked performance improvement when it
was
compiled.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr. Fax: (254)741-5777
Waco, Texas 76710
-----Original Message-----
From: CMSTSO Pipelines Discussion List
[mailto:[email protected]] On Behalf Of Schuh, Richard
Sent: Thursday, September 10, 2009 3:54 PM
To: [email protected]
Subject: Re: [CMS-PIPELINES] Strip /* */ type comments
I forgot to mention, CMPRREXX is/was a REXX filter from IBM at least as
early as VMESA 2.1.0. I don't know where it lives today, except for the
copy on my Tools disk, that is.
Regards,
Richard Schuh
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of SPITZ,
> HOBART CTR DFAS
> Sent: Thursday, September 10, 2009 1:47 PM
> To: [email protected]
> Subject: Re: Strip /* */ type comments
>
> See new split.
>
> "PIPE (endchar ?)",
> " < SYSTEM CONFIG T",
> "| STRIP",
> "| INSERT x01 AFTER",
> "| SPLIT BEFORE STR '/*'",
> "| SPLIT BEFORE STR '*/'",
> "| split after str '*/'",
> "| NOT BETWEEN '/*' '*/'",
> "| JOINCONT NOT TRAILING x01",
> "| CONSOLE"
>
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of Frank M. Ramaekers
> Sent: Thursday, September 10, 2009 4:37 PM
> To: [email protected]
> Subject: Re: [CMS-PIPELINES] Strip /* */ type comments
>
> This close:
>
> "PIPE (endchar ?)",
> " < SYSTEM CONFIG T",
> "| STRIP",
> "| INSERT x01 AFTER",
> "| SPLIT BEFORE STR '/*'",
> "| SPLIT BEFORE STR '*/'",
> "| NOT BETWEEN '/*' '*/'",
> "| JOINCONT NOT TRAILING x01",
> "| CONSOLE"
>
> Except for:
>
> Features ,
>
> Disable , Set_Privclass ,
> Auto_Warm_IPL , Clear_TDisk , Enable,
> Dynamic_I/O,
>
> Set_Devices,
>
> Set_Dynamic_I/O,
>
> New_devices_Initialized_When_Added,
>
> Retrieve , Default 20 , Maximum
> 255 , MaxUsers noLimit , Password
> s_on_Cmds , Autolog No , Link No ,
> Logon No , Vdisk Userlim 1440
> 00 blocks
>
>
> Which was:
>
> Features ,
> Disable , /* Disable the following features */
> Set_Privclass , /* Disallow SET PRIVCLASS command */
> Auto_Warm_IPL , /* Prompt at IPL always */
> Clear_TDisk , /* Don't clear TDisks at IPL time */
> Enable,
> Dynamic_I/O,
> Set_Devices,
> Set_Dynamic_I/O,
> New_devices_Initialized_When_Added,
> Retrieve , /* Retrieve options */
> Default 20 , /* Default.... default is 20 */
> Maximum 255 , /* Maximum.... default is 255 */
> MaxUsers noLimit , /* No limit on number of users */
> Passwords_on_Cmds , /* What commands allow passwords? */
> Autolog No , /* ... AUTOLOG does */
> Link No , /* ... LINK does */
> Logon No , /* ... and LOGON does, too */
> Vdisk Userlim 144000 blocks /* Maximum vdisk allowed per user */
>
> Frank M. Ramaekers Jr.
> Systems Programmer MCP, MCP+I, MCSE & RHCE
> American Income Life Insurance Co. Phone: (254)761-6649
> 1200 Wooded Acres Dr. Fax: (254)741-5777
> Waco, Texas 76710
>
>
>
>
>
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of SPITZ,
> HOBART CTR DFAS
> Sent: Thursday, September 10, 2009 3:25 PM
> To: [email protected]
> Subject: Re: [CMS-PIPELINES] Strip /* */ type comments
>
> Sorry. I did it from memory. It's "insert x01 after", of course.
>
> Any suitable end of line marker will do.
>
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of Frank M. Ramaekers
> Sent: Thursday, September 10, 2009 4:20 PM
> To: [email protected]
> Subject: Re: [CMS-PIPELINES] Strip /* */ type comments
>
> PIPCHA060E Delimiter missing after string "AFTER x01".
> PIPSCA003I ... Issued from stage 3 of pipeline 1.
> PIPSCA001I ... Running "INSERT AFTER x01".
>
>
> +-------------------------------------------------------------
> ----------
> ----+
> ! |
> |
> ! | +-BEFORE-+
> |
> ! |
> >>--INSERT--delimitedString--+--------+--+------------+-------
> --------->
> < |
> ! | +-AFTER--+ +-inputRange-+
> |
> |
> |
>
> +-------------------------------------------------------------
> ----------
> ----+
>
> Frank M. Ramaekers Jr.
> Systems Programmer MCP, MCP+I, MCSE & RHCE
> American Income Life Insurance Co. Phone: (254)761-6649
> 1200 Wooded Acres Dr. Fax: (254)741-5777
> Waco, Texas 76710
>
>
>
>
>
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of SPITZ,
> HOBART CTR DFAS
> Sent: Thursday, September 10, 2009 3:13 PM
> To: [email protected]
> Subject: Re: [CMS-PIPELINES] Strip /* */ type comments
>
> ... | insert after x01 | split before '/*' | split before
> '*/' | not between '/*' '*/' | joincont not trailing x01 | ...
>
> -----Original Message-----
> From: CMSTSO Pipelines Discussion List
> [mailto:[email protected]] On Behalf Of Frank M. Ramaekers
> Sent: Thursday, September 10, 2009 4:03 PM
> To: [email protected]
> Subject: [CMS-PIPELINES] Strip /* */ type comments
>
> Is there a way to strip the /* */ type comments from a stream?
> Same line / Partial line / Spanned lines
>
> Frank M. Ramaekers Jr.
> Systems Programmer MCP, MCP+I, MCSE & RHCE
> American Income Life Insurance Co. Phone: (254)761-6649
> 1200 Wooded Acres Dr. Fax: (254)741-5777
> Waco, Texas 76710
>
>
> _____________________________________________________
>
> This message contains information which is privileged and
> confidential and is solely for the use of the
>
> intended recipient. If you are not the intended recipient, be
> aware that any review, disclosure,
>
> copying, distribution, or use of the contents of this message
> is strictly prohibited. If you have
>
> received this in error, please destroy it immediately and
> notify us at [email protected].
>
> _____________________________________________________
>
> This message contains information which is privileged and
> confidential and is solely for the use of the
>
> intended recipient. If you are not the intended recipient, be
> aware that any review, disclosure,
>
> copying, distribution, or use of the contents of this message
> is strictly prohibited. If you have
>
> received this in error, please destroy it immediately and
> notify us at [email protected].
>
> _____________________________________________________
>
> This message contains information which is privileged and
> confidential and is solely for the use of the
>
> intended recipient. If you are not the intended recipient, be
> aware that any review, disclosure,
>
> copying, distribution, or use of the contents of this message
> is strictly prohibited. If you have
>
> received this in error, please destroy it immediately and
> notify us at [email protected].
>
_____________________________________________________
This message contains information which is privileged and confidential and is
solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any
review, disclosure,
copying, distribution, or use of the contents of this message is strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
